Attempting to take away a cussed bathtub faucet generally is a irritating expertise. Nonetheless, with the fitting instruments and a little bit little bit of persistence, it is a job that may be achieved by most DIYers.
Earlier than you start, it is necessary to assemble the required instruments. You’ll need a wrench, a pair of pliers, and a screwdriver. Moreover, you may additionally want a putty knife or a utility knife to assist take away any caulk or sealant across the faucet. Upon getting your instruments assembled, you’ll be able to start the method of eradicating the tap.
Step one is to show off the water provide to the tap. This will normally be carried out by turning off the valves positioned below the sink. As soon as the water is turned off, you’ll be able to start to loosen the nuts that maintain the tap in place. These nuts are sometimes positioned on the underside of the tap, and they are often loosened utilizing a wrench. As soon as the nuts are unfastened, you’ll be able to take away the tap by pulling it straight up. Watch out to not injury the sink or the encircling countertop when eradicating the tap.
Figuring out the Sort of Faucet and Deal with
Earlier than you take away the tap, it is important to determine the kind of faucet and deal with you’ve got. This can enable you to select the proper instruments and strategy for the job.
Forms of Taps
There are two essential varieties of bathtub taps: single-handle and two-handle. Single-handle taps have one lever that controls each the water temperature and circulate, whereas two-handle taps have separate handles for cold and hot water.
Forms of Handles
Faucet handles are available varied types, together with lever handles, cross handles, and knob handles. Lever handles are the commonest sort of handles, whereas cross handles and knob handles are extra conventional.
Lever Handles
Lever handles are sometimes made from metallic or plastic and have a single lever that strikes up and down or left and proper to regulate the water temperature and circulate.
Cross Handles
Cross handles are made from metallic or plastic and have two handles that transfer perpendicular to one another. The left deal with controls the recent water, whereas the fitting deal with controls the chilly water.
Knob Handles
Knob handles are made from metallic or plastic and have two knobs that flip clockwise and counterclockwise to regulate the water temperature and circulate.
|
| Faucet Sort | Deal with Sort |
|---|---|
| Single-handle | Lever deal with |
| Two-handle | Cross handles |
| Knob handles |
Gathering Crucial Instruments
Instruments Required:
| Software | Objective |
|---|---|
| Adjustable wrench | Loosens and tightens nuts and bolts of all sizes |
| Channel-type pliers | Grips and turns spherical objects like the tub drain |
| Adjustable basin wrench | Particularly designed to entry and loosen difficult-to-reach nuts behind the tap |
| Teflon tape | Creates a watertight seal round threaded connections |
| Painter’s tape | Protects the tub floor from scratches and dents |
| Fabric or towel | Prevents moisture from damaging surrounding areas |
| Phillips and flathead screwdrivers (non-compulsory) | Tightens or loosens screws relying on the tap design |
| Allen wrench (non-compulsory) | Tightens or loosens bolts with hexagonal heads |
| Bucket | Catches water dripping throughout the elimination course of |
Guarantee you’ve got all the required instruments earlier than starting the elimination course of. Replacements for any lacking instruments could be discovered at {hardware} shops or plumbing provide facilities.
Turning Off Water Provide
Earlier than you start working in your bathtub faucet, it’s essential to show off the water provide to forestall any water injury or interruptions throughout the course of. This is a step-by-step information that can assist you flip off the water provide:
- Find the shut-off valves: Discover the 2 shut-off valves, normally positioned below the sink or behind the tub. They’re sometimes small, spherical handles or lever-operated valves.
- Flip off the recent water valve: Utilizing a wrench or pliers, flip the recent water valve clockwise till it’s totally closed. This can cease the circulate of sizzling water to the tap.
- Flip off the chilly water valve: Find the chilly water valve, which is normally subsequent to the recent water valve. Flip it clockwise till it’s fully closed to cease the circulate of chilly water.
Further Ideas:
- In the event you can not find the shut-off valves below the sink or behind the tub, verify within the basement or crawl area.
- If the shut-off valves are previous or rusty, use a penetrating oil to loosen them up earlier than turning them.
- In case you have any issue turning off the water provide, contact a licensed plumber for help.
| Valve Sort | Closing Route |
|---|---|
| Lever-operated | Transfer the lever in the direction of the “off” place |
| Spherical deal with | Flip the deal with clockwise |
Loosening the Cartridge or Valve
Most fashionable bathtub taps have cartridges or valves that management the circulate of water. To loosen a cartridge, you may sometimes want a cartridge puller, which is a small software with prongs that match into the slots on the cartridge. If you do not have a cartridge puller, you’ll be able to strive utilizing a pair of needle-nose pliers, however watch out to not injury the cartridge. As soon as the cartridge is unfastened, you’ll be able to pull it out of the tap physique.
To loosen a valve, you may sometimes want an Allen wrench or a screwdriver. Insert the wrench or screwdriver into the screw on the highest of the valve and switch it counterclockwise to loosen the valve. As soon as the valve is unfastened, you’ll be able to take away it from the tap physique.
In the event you’re having hassle loosening the cartridge or valve, it’s possible you’ll want to use some penetrating oil to the threads. Let the penetrating oil sit for a couple of minutes earlier than attempting to loosen the cartridge or valve once more.
This is a desk summarizing the steps for loosening the cartridge or valve:
| Step | Description |
|---|---|
| 1 | Flip off the water provide to the tap. |
| 2 | Take away the aerator from the tap spout. |
| 3 | Insert the cartridge puller or Allen wrench into the screw on the highest of the cartridge or valve. |
| 4 | Flip the cartridge puller or Allen wrench counterclockwise to loosen the cartridge or valve. |
| 5 | Pull the cartridge or valve out of the tap physique. |
Eradicating the Faucet Physique
As soon as the deal with is eliminated, it’s essential take away the tap physique. To do that, observe these steps:
- Find the retaining nut that secures the tap physique to the valve. It’s normally positioned on the base of the tap physique, simply above the mounting flange.
- Utilizing a wrench or pliers, fastidiously loosen the retaining nut. Watch out to not over-tighten the nut, as this could injury the tap physique.
- Pull the tap physique straight up and off the valve. There could also be some resistance, nevertheless it ought to come off simply.
- If the tap physique doesn’t come off simply, it’s possible you’ll want to make use of a penetrating lubricant to assist loosen the retaining nut. Apply the lubricant to the nut and let it sit for a couple of minutes earlier than attempting to loosen it once more.
- As soon as the tap physique is eliminated, you’ll be able to entry the valve and the cartridge (if relevant). Chances are you’ll have to take away the cartridge with a purpose to exchange the tap or to restore the valve.
Ideas for Eradicating the Faucet Physique
- If the tap physique is corroded or rusted, it’s possible you’ll want to make use of a penetrating lubricant to assist loosen it.
- Watch out to not over-tighten the retaining nut, as this could injury the tap physique.
- If you’re having issue eradicating the tap physique, you’ll be able to name a plumber for help.
| Software | Use |
|---|---|
| Adjustable wrench | To loosen and tighten the retaining nut |
| Pliers | To carry the tap physique in place whereas loosening the retaining nut |
| Penetrating lubricant | To assist loosen the retaining nut whether it is corroded or rusted |
Changing the Faucet Physique
Changing the tap physique is a barely extra concerned course of than changing the cartridge, however it’s nonetheless comparatively easy. Observe these steps:
1. Collect your instruments and supplies.
- Adjustable wrench
- Screwdriver
- New faucet physique
- Plumber’s putty
- Teflon tape
2. Flip off the water provide.
Find the shut-off valves beneath the sink and switch them off. You possibly can determine the valves by their purple handles.
3. Disconnect the water traces.
Unscrew the nuts that connect the water traces to the tap physique. Chances are you’ll want to make use of an adjustable wrench.
4. Unscrew the mounting nuts.
There are two nuts that maintain the tap physique in place. Use an adjustable wrench to loosen them.
5. Take away the previous faucet physique.
As soon as the nuts are unfastened, you’ll be able to pull the previous faucet physique straight up and out of the sink.
6. Put together the brand new faucet physique.
Apply a bead of plumber’s putty across the base of the brand new faucet physique. Wrap a number of turns of Teflon tape across the threads of the water traces.
7. Set up the brand new faucet physique.
Insert the brand new faucet physique into the sinkhole. Tighten the mounting nuts by hand, then use an adjustable wrench to additional tighten them.
8. Reconnect the water traces.
Hand-tighten the nuts that connect the water traces to the tap physique. Use an adjustable wrench to additional tighten them, however watch out to not overtighten.
9. Activate the water provide.
Activate the shut-off valves beneath the sink and verify for leaks. In the event you see any leaks, tighten the nuts or connections as essential.
How To Get Bathtub Faucet Off
Bathtub taps generally is a ache to take away, particularly in the event that they’re previous or rusted. However with the fitting instruments and a little bit little bit of know-how, you will get the job carried out very quickly.
Step 1: Collect your instruments
You’ll need the next instruments to take away a tub faucet:
- Adjustable wrench
- Allen wrench (if the tap has set screws)
- Channel-lock pliers
- Bucket
- Rags
Step 2: Flip off the water
Earlier than you begin engaged on the tap, it’s essential flip off the water provide. This can forestall any water from leaking out and making a multitude.
To show off the water provide, find the shut-off valves below the sink. Shut each valves by turning them clockwise.
Step 3: Disconnect the water traces
As soon as the water provide is turned off, you’ll be able to disconnect the water traces from the tap. To do that, use an adjustable wrench to loosen the nuts that maintain the traces in place.
Watch out to not over-tighten the nuts, as this might injury the traces.
Step 4: Take away the tap
Now that the water traces are disconnected, you’ll be able to take away the tap. To do that, use an Allen wrench to take away the set screws that maintain the tap in place.
As soon as the set screws are eliminated, you should use a channel-lock pliers to softly rock the tap forwards and backwards till it loosens.
Step 5: Clear the realm
As soon as the tap is eliminated, you’ll be able to clear the realm the place it was put in. Use a bucket and rags to wash up any water or particles.
Individuals Additionally Ask About How To Get Bathtub Faucet Off
How do I take away a tub faucet deal with?
To take away a tub faucet deal with, first use an Allen wrench to take away the set screw that holds the deal with in place. As soon as the set screw is eliminated, you’ll be able to pull the deal with straight off.
How do I exchange a tub faucet cartridge?
To interchange a tub faucet cartridge, first flip off the water provide. Then, take away the tap deal with and unscrew the cartridge nut. As soon as the cartridge nut is eliminated, you’ll be able to pull the cartridge straight out of the tap physique.
How do I repair a leaky bathtub faucet?
There are a number of alternative ways to repair a leaky bathtub faucet. One frequent answer is to interchange the washer or O-ring that’s inflicting the leak.
