Are you bored with that cumbersome rearview mirror mount cluttering up your dashboard? Is it wobbling round, obscuring your view, and driving you to the brink of distraction? Effectively, fear no extra! Eradicating the rearview mirror mount is a straightforward and simple course of that may be accomplished in only a few minutes with the appropriate instruments and methods. Whether or not you are trying to swap to a distinct mount, promote your automobile, or just need a cleaner aesthetic, this information will give you the step-by-step directions you might want to sort out this process with ease. So seize your instruments and let’s get began!
To start, collect the required instruments, together with a flathead screwdriver or pry device, a Phillips head screwdriver, and a clear fabric. Find the bottom of the rearview mirror mount the place it connects to the windshield. Fastidiously insert the flathead screwdriver or pry device into the hole between the mount and the windshield. Gently pry the mount away from the windshield, being cautious to not injury the glass. As soon as the mount is free, use the Phillips head screwdriver to take away the screws which can be holding it in place.
With the screws eliminated, the rearview mirror mount ought to come off simply. Merely elevate it up and away from the windshield. Use the clear fabric to wipe away any remaining adhesive or residue from the windshield and the mount. Should you’re not planning on reusing the mount, you possibly can discard it. Nonetheless, if you wish to hold it for future use, ensure that to retailer it in a protected place the place it will not get broken.
Detaching the Mirror Head
### Gently Pry the Mirror Head Unfastened
To detach the mirror head, start by fastidiously inserting a plastic or wood pry device or a flat-head screwdriver wrapped in a fabric between the mirror head and the bottom of the windshield. Keep away from utilizing metallic instruments, as they’ll scratch or injury the glass.
### Work Slowly and Step by step
Apply mild stress to the pry device whereas concurrently pulling the mirror head in direction of you. Work slowly and regularly, avoiding sudden or extreme power that would break the mirror or injury the windshield. Proceed prying and pulling till the mirror head pops free from the bottom.
### Assist the Mirror Head
Because the mirror head loosens, you should definitely assist it along with your different hand to forestall it from falling and damaging the automobile or your self. Grip the mirror head firmly and thoroughly detach it from the bottom. Take care to not scratch or injury the mirror floor or the windshield throughout this course of.
Be aware: Should you encounter vital resistance or really feel any reluctance in detaching the mirror head, don’t power it. Cease and seek the advice of an expert for help to keep away from damaging the automobile.
Tip: Warming the adhesive across the mirror base with a warmth gun or hair dryer may help loosen it and make removing simpler.
Accessing the Mirror Mount
Step one is to take away the plastic cowl on the bottom of your rear view mirror. It’s often held in place by two or three small screws. As soon as the quilt is off, you will note the principle mirror mount, which is linked to the windshield by a collection of bolts or screws.
| Kind of Mount | Elimination Methodology |
|---|---|
| Bolt-on Mount | Unscrew the bolts holding the mount to the windshield. |
| Screw-on Mount | Unscrew the screws holding the mount to the windshield. |
| Adhesive Mount | Fastidiously use a pry device to take away the mount from the windshield. |
Relying on the kind of mount you will have, you have to both a screwdriver or a wrench.
After getting loosened the bolts or screws, you possibly can gently pry the mirror mount away from the windshield. Watch out to not injury the windshield or the mirror mount.
Eradicating the Retaining Nuts
The retaining nuts are what maintain the rear-view mirror mount in place. To take away them, you have to a 10mm socket wrench or a pair of needle-nose pliers.
After getting the instruments you want, comply with these steps:
- Find the retaining nuts on the underside of the rear-view mirror mount. There will probably be two nuts, one on both sides.
- Use the socket wrench or needle-nose pliers to loosen the nuts. Don’t take away them fully but.
- As soon as the nuts are free, you possibly can fastidiously elevate the rear-view mirror mount off of the windshield. Watch out to not drop the mount, because it might break.
Here’s a desk summarizing the steps:
| Step | Motion | ||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Find the retaining nuts on the underside of the rear-view mirror mount. | ||||||||||||||||||||||||||||||||||||||||||||
| 2 | Use a 10mm socket wrench or needle-nose pliers to loosen the nuts. | ||||||||||||||||||||||||||||||||||||||||||||
| 3 | As soon as the nuts are free, fastidiously elevate the rear-view mirror mount off of the windshield. |
| Tip | Description |
|---|---|
| Use a small flathead screwdriver to softly pry the connectors aside. | Watch out to not injury the wires or connectors. |
| If the connectors are tough to pry aside, you should utilize a pair of needle-nose pliers to softly squeeze the connectors collectively whereas pulling them aside. | Once more, watch out to not injury the wires or connectors. |
| As soon as the connectors are disconnected, you possibly can take away the mirror mount from the automobile. | To do that, merely pull the mount straight out of the windshield. |
Avoiding Mirror Harm
When eradicating the mirror mount, it is very important take precautions to keep away from damaging the mirror itself. Listed here are some ideas to assist forestall injury:
- Use a comfortable fabric or towel to guard the mirror. Place the fabric or towel over the mirror earlier than beginning to take away the mount.
- Watch out to not apply an excessive amount of stress to the mirror. Use a mild contact when eradicating the mount.
- Don’t use any sharp objects to pry the mount off. This might injury the mirror.
- If the mount is caught, use a hair dryer to warmth it up. It will make it simpler to take away.
- As soon as the mount is eliminated, examine the mirror for any injury. If there’s any injury, it’s possible you’ll want to switch the mirror.
- To stop future injury, clear the mirror usually and keep away from making use of an excessive amount of stress to it.
Utilizing Acceptable Instruments
When eradicating the rear view mirror mount, it’s essential to have the appropriate instruments for the job. The next are important instruments you have to:
- Phillips screwdriver
- Flat-head screwdriver
- Crowbar (non-compulsory)
- Pry bar (non-compulsory)
- Trim removing device (non-compulsory)
Step 7: Eradicating the Mount
After getting situated the mounting bolts, use the suitable screwdriver to fastidiously take away them. Grip the mount firmly and gently pull it down and off the windshield. In some instances, it’s possible you’ll encounter some resistance. In that case, use the pry bar or crowbar (wrapped with a fabric to forestall scratches) to fastidiously pry the mount away from the windshield. Keep away from extreme power to forestall damaging the windshield or the mount itself.
In some autos, the rear view mirror mount could also be secured with further clips or bolts. If so, use the suitable instruments to take away these further fasteners earlier than trying to take away the mount.
| Instrument | Objective |
|---|---|
| Phillips screwdriver | Eradicating mounting bolts |
| Flat-head screwdriver | Prying or eradicating clips |
| Crowbar (non-compulsory) | Gently prying the mount off the windshield |
| Pry bar (non-compulsory) | Gently prying the mount off the windshield |
| Trim removing device (non-compulsory) | Eradicating clips or trim panels across the mount |
Reinstalling the Rear View Mirror
As soon as the mount has been eliminated, you possibly can reinstall the rear view mirror by following these steps:
- Clear the mounting floor on the windshield with a glass cleaner and a lint-free fabric. It will be certain that the adhesive bond between the mirror and the windshield is robust.
- Apply a skinny bead of mirror adhesive to the again of the mirror mount. Don’t use an excessive amount of adhesive, as this will make it tough to place the mirror accurately and may trigger the mirror to fall off.
- Fastidiously align the mirror mount with the mounting floor on the windshield and press it into place. Maintain the mirror in place for a number of seconds to permit the adhesive to set.
- As soon as the adhesive has set, regulate the mirror to the specified place.
- Enable the adhesive to dry fully earlier than driving the automobile. It will be certain that the mirror is securely hooked up to the windshield.
- You probably have any issue reinstalling the rear view mirror, seek the advice of a certified mechanic.
Extra Ideas:
- Use a high-quality mirror adhesive that’s particularly designed for automotive use.
- Ensure the windshield and the again of the mirror mount are clear and freed from any filth or particles.
- Don’t apply an excessive amount of stress when urgent the mirror mount into place, as this will injury the windshield.
- Enable the adhesive to dry fully earlier than driving the automobile, as it will be certain that the mirror is securely hooked up to the windshield.
Here’s a desk summarizing the steps for reinstalling the rear view mirror:
Step Motion 1 Clear the mounting floor on the windshield. 2 Apply a skinny bead of mirror adhesive to the again of the mirror mount. 3 Align the mirror mount with the mounting floor on the windshield and press it into place. 4 Alter the mirror to the specified place. 5 Enable the adhesive to dry fully earlier than driving the automobile. Tightening the Retaining Nuts
As soon as the mirror is in place and the retaining nuts are finger-tight, you should utilize a wrench to tighten them additional. Nonetheless, watch out to not overtighten the nuts, as this might injury the mirror or the windshield.
To tighten the nuts, insert the wrench into the slot on the again of the nut and switch it clockwise. Tighten the nuts till they’re comfortable, however don’t overtighten them.
Step Description 1 With the mirror in place place the retaining nuts over the mirror mount stud(s) 2 Finger tighten retaining nuts onto studs by turning them clockwise 3 Insert rearview mirror mounting device or appropriate wrench into the slot on the again of the nut 4 Gently however firmly, flip the wrench clockwise to tighten each retaining nuts equally 5 Proceed to tighten the nuts till they’re comfortable – don’t overtighten As soon as the nuts are tightened, you possibly can test the mirror to ensure that it’s securely hooked up. If the mirror is free, you possibly can tighten the nuts additional. Nonetheless, if the mirror is just too tight, it’s possible you’ll have to loosen the nuts barely.
Security Precautions
Earlier than starting any repairs, it is very important take the next security precautions:
- Disconnect the battery to forestall unintentional electrical shocks.
- Put on gloves to guard your arms from sharp edges.
- Use correct instruments for the job, comparable to a screwdriver or wrench.
Eradicating the Rear View Mirror Mount
To take away the rear view mirror mount, comply with these steps:
- Find the screws that maintain the mount in place. These screws are often situated on the underside or the perimeters of the mount.
- Use a screwdriver to take away the screws.
- Grip the mount and pull it straight right down to take away it from the windshield.
Troubleshooting Widespread Points
Unable to Find the Mounting Screws
Should you can not discover the mounting screws, seek the advice of your automobile’s proprietor’s guide or search on-line for directions particular to your make and mannequin.
Screw Heads are Stripped
If the screw heads are stripped, use a pair of needle-nose pliers to grip the screw and switch it out. It’s also possible to attempt utilizing a rubber band between the screwdriver and the screw head for higher grip.
Mount is Caught to the Windshield
If the mount is caught to the windshield, use a plastic pry device or a bank card to softly pry it free. Watch out to not injury the windshield.
New Mount Does Not Match
If the brand new mount doesn’t match, guarantee that you’ve got bought the right mount in your automobile. You may additionally want to regulate the place of the mount on the windshield.
Mount is Unfastened
If the mount is free, tighten the mounting screws. You may additionally want to use a small quantity of adhesive to the again of the mount for added safety.
Mirror Vibrates
If the mirror vibrates, tighten the mounting screws. You may additionally want to regulate the place of the mirror to cut back vibration.
Mirror Does Not Keep in Place
If the mirror doesn’t keep in place, tighten the mounting screws. You may additionally want to wash the windshield and the again of the mirror to take away any filth or particles that could be interfering with the adhesive.
Mirror is Too Excessive or Too Low
If the mirror is just too excessive or too low, regulate the place of the mount on the windshield. You may additionally want to regulate the mirror itself.
Mirror is Off-Heart
If the mirror is off-center, loosen the mounting screws and regulate the place of the mount till the mirror is centered. Then, tighten the mounting screws.
Mirror is Shaking
If the mirror is shaking, tighten the mounting screws. You may additionally want to switch the mirror whether it is free or broken.
The way to Take away the Rear View Mirror Mount
The rear view mirror mount is a small however necessary a part of your automobile. It holds the rear view mirror in place and permits you to regulate it to your required place. Over time, the mount can develop into free or broken, which might make it tough to see out of the rear view mirror. If you might want to take away the rear view mirror mount, listed below are the steps to comply with:
- Park the automobile in a protected location and switch off the engine.
- Find the 2 screws that maintain the mount in place. They’re often situated on the underside of the mount.
- Use a screwdriver to take away the screws.
- As soon as the screws are eliminated, fastidiously elevate the mount off of the windshield.
- If the mount is caught, it’s possible you’ll want to make use of a pry device to softly pry it off.
- As soon as the mount is eliminated, you possibly can exchange it with a brand new one.
Folks Additionally Ask
How do I take away the rear view mirror mount with out breaking the windshield?
Use a pry device to softly pry the mount off of the windshield. Watch out to not apply an excessive amount of stress, as this might crack the windshield.
Can I take away the rear view mirror mount myself?
Sure, you possibly can take away the rear view mirror mount your self. Nonetheless, in case you are not comfy working in your automobile, it’s best to take it to a mechanic.
What instruments do I have to take away the rear view mirror mount?
You will have a screwdriver and a pry device to take away the rear view mirror mount.
