Putting in a drain pipe in your washer can seem to be a frightening job, however with slightly preparation and steering, you may simply sort out this mission your self. Whether or not you are establishing a brand new washer or rerouting an present one, having a correct drainage system is crucial for guaranteeing your laundry room operates effectively and with none nasty surprises.
On this complete information, we’ll break down your entire course of into easy-to-follow steps, offering you with the detailed directions and ideas you want. We’ll cowl every thing from gathering the required supplies to connecting the drain hose to your washer and securing it to the drainpipe. Alongside the best way, we’ll emphasize security precautions and customary troubleshooting strategies so to set up your washer drainpipe with confidence.
Keep in mind, taking the time to put in a drain pipe appropriately is not going to solely forestall water harm and unsightly odors in your laundry room but additionally make sure that your washer runs easily for years to return. So, let’s get began and delve into the world of DIY drain pipe set up!
Deciding on the Applicable Pipe and Fittings
Selecting the best pipe and fittings is essential to make sure a long-lasting and environment friendly drain system in your washer. Listed here are some concerns:
Diameter and Materials:
The pipe diameter must be 1-1/2 inches in diameter to accommodate the excessive quantity of water discharged from the washer. Widespread supplies for drain pipes embrace:
- PVC (Polyvinyl Chloride): Sturdy, light-weight, and proof against most chemical substances.
- ABS (Acrylonitrile Butadiene Styrene): Just like PVC however barely extra versatile and heat-resistant.
- CPVC (Chlorinated Polyvinyl Chloride): Utilized in scorching water functions because of its larger temperature tolerance.
Fittings:
Important fittings embrace:
- Elbows: Join pipes at angles to vary their path.
- Tee Fittings: Create connections between a number of pipes.
- Couplings: Be a part of straight pipe sections.
- Reducers: Transition pipes to attach totally different diameters.
Lure:
The lure is a U-shaped becoming put in on the base of the drain to stop sewer gases from escaping into the home. Traps with an simply detachable cleanout plug are really helpful for upkeep.
| Diameter of Drain Pipe: 1-1/2 inches |
| Widespread Drain Pipe Supplies: PVC, ABS, CPVC |
| Important Fittings: Elbows, Tee Fittings, Couplings, Reducers, Lure |
Getting ready the Discharge Level
### Select the Location
Choose an acceptable location for the discharge level, guaranteeing it is accessible and inside attain of the washer’s drain hose. Think about the space, slope, and obstacles between the machine and the discharge level.
### Decide the Discharge Methodology
Determine the tactic of discharge, both on to a drainpipe, ground drain, or out of doors drain. If connecting to a drainpipe, guarantee its diameter is giant sufficient to accommodate the drain hose. For ground drains, make sure the drain is correctly sealed to stop leaks.
### Create a Slope
Create a slight downward slope from the washer to the discharge level. This slope will permit water to empty freely and stop backflow into the machine. The slope must be roughly 1/4 inch per foot.
### Safe the Drainpipe
If linked to a drainpipe, safe the washer’s drain hose to the drainpipe utilizing a hose clamp or zip tie. Make sure the connection is tight and leak-proof.
Extra Suggestions
* Use a drain lure to stop odors from escaping into the room.
* If putting in an outside drain, guarantee it complies with native constructing codes and rules.
* Think about using a standpipe to raise the discharge level and enhance drainage.
Reducing and Assembling the Drain Pipe
To successfully join your washer to the drainage system, the drain pipe should be lower and assembled precisely. Here is an in depth information to make sure a safe and environment friendly connection:
Supplies you may want:
- Drain hose for the washer
- Clamps or hose clamps
- Teflon tape or plumber’s putty
- Measuring tape or ruler
- Sharp utility knife or scissors
Steps:
1. Measure and Reduce the Drain Pipe: Decide the suitable size of the drain hose by measuring the space between the washer’s drain outlet and the drain pipe. Mark the measurement on the hose utilizing a measuring tape or ruler. Rigorously lower the hose on the marked level utilizing a pointy utility knife or scissors.
2. Apply Teflon Tape or Plumber’s Putty: For a safe and watertight connection, apply Teflon tape or plumber’s putty to the threads of the drain pipe’s becoming. Wrap the tape or putty tightly and evenly across the threads to create a seal.
3. Assemble the Drain Pipe: Join the drain hose to the drain pipe’s becoming by hand-tightening it. Be sure that the hose is absolutely inserted and the connection is cosy. Use a wrench to additional tighten the connection, however don’t overtighten. Safe the reference to a clamp or hose clamp to stop it from coming unfastened.
Attaching the Drain Hose to the Washing Machine
1. Find the drain hose that got here together with your washer. It’s normally a
versatile, corrugated hose that’s about 6 ft lengthy and has a diameter of 1 to 1.5
inches.
2. Slide the clamp onto the drain hose, about 6 inches from the top. The clamp
must be tight sufficient to carry the hose in place, however not so tight that it crimps the
hose.
3. Connect the drain hose to the drain outlet on the again of the washer.
The drain outlet is normally a plastic or steel pipe that’s situated close to the underside
of the machine.
4. Tighten the clamp to safe the drain hose to the drain outlet. Guarantee that the
hose isn’t kinked or twisted.
| Step | Description | Picture |
|---|---|---|
| 1 | Find the drain hose that got here together with your washer. |  |
| 2 | Slide the clamp onto the drain hose, about 6 inches from the top. |  |
| 3 | Connect the drain hose to the drain outlet on the again of the washer. |  |
| 4 | Tighten the clamp to safe the drain hose to the drain outlet. |  |
Routing the Drain Pipe to the Discharge Level
Upon getting chosen an acceptable discharge level, you have to route the drain pipe accordingly. Here is find out how to do it:
1. Measure and Reduce the Drain Pipe
Decide the size of the drain pipe wanted and lower it to measurement utilizing a hacksaw or pipe cutter.
2. Connect the Drain Hose to the Washing Machine
Join the drain hose to the drain pump outlet on the washer. Safe it with the offered hose clamp.
3. Determine on the Discharge Methodology
Decide if you wish to discharge the wastewater immediately right into a drain pipe or use a standpipe.
4. Join the Drain Pipe to the Discharge Level
If utilizing a drain pipe, insert the drain hose into the pipe and safe it with a hose clamp. If utilizing a standpipe, set up the standpipe and join the drain hose to it.
5. Make the most of a Drainage Sump Pump
In instances the place the discharge level is situated under the washer, a drainage sump pump could also be required. Set up the pump and join the drain hose to it. The pump will carry the wastewater and discharge it into the specified location.
| Discharge Methodology | Particulars |
|---|---|
| Direct Drain | Connects the drain hose on to a drain pipe. |
| Standpipe | Installs a standpipe and connects the drain hose to it. Used when the discharge level is larger than the washer. |
| Drainage Sump Pump | Utilized when the discharge level is under the washer. The pump lifts the wastewater and discharges it. |
Testing for Leaks and Performance
1. Water Provide Check
With the drain hose linked, activate the water provide to the washer and permit it to fill with water. Verify for leaks across the drain hose connection level and the water provide traces.
2. Drain Cycle Check
Place a bucket or empty container beneath the drain hose and begin a drain cycle with none garments within the machine. The water ought to drain into the container with none leaks or blockages.
3. Washing Cycle Check
Run a brief washing cycle with a small load of garments. Observe the drain hose and make sure that the water drains easily and doesn’t leak. If the water backs up or drains slowly, there could also be a blockage within the drain hose or plumbing system.
4. Rinse Cycle Check
After the washing cycle, begin a rinse cycle and verify for leaks. The rinse cycle includes draining and refilling the machine with clear water.
5. Spin Cycle Check
Begin a spin cycle to check the drain hose’s skill to deal with a excessive quantity of water. Observe the hose for leaks or extreme vibration.
6. Detergent and Cloth Softener Check
Add a small quantity of detergent and cloth softener to the machine and run a brief cycle. Verify for any leaks across the detergent dispenser or the drain hose connection level.
7. Prolonged Interval of Use
After conducting the preliminary exams, monitor the washer for a couple of days to make sure that there are not any hidden leaks or drainage points. Run a number of several types of cycles with various hundreds to check the system’s general performance and sturdiness.
Putting in a Drain Lure (Elective)
Putting in a drain lure is crucial to stop sewer gases and odors from coming into your house. It acts as a barrier, trapping water and making a seal that retains dangerous gases out. Here is find out how to do it:
1. Measure and lower the drainpipe to the specified size.
2. Insert the rubber grommet into the drain outlet of the washer.
3. Slide the hose clamp over the top of the drainpipe and tighten it onto the grommet.
4. Join the opposite finish of the drainpipe to the drain lure.
5. Tighten the hose clamp onto the drain lure to safe the connection.
6. Run a bead of sealant across the base of the drain lure to create a watertight seal.
7. Safe the drain lure to the wall or ground utilizing screws or brackets.
8. Place the U-shaped drain lure appropriately. The underside portion of the lure must be full of water to create a seal, so be certain that the lure isn’t tilted or larger than the drain outlet of the washer. The lure should have sufficient slope to permit water to move freely.
– Verify for correct drainage: Activate the washer and observe if the water drains easily by way of the lure. Regulate the place of the lure if needed.
– Usually clear the drain lure: Over time, hair, cleaning soap scum, and different particles can accumulate within the lure, blocking water move. To stop this, unscrew the cleanout plug situated on the underside of the lure and take away any collected particles.
Connecting the Drain Pipe to the Drain System
As soon as the drain pipe is linked to the washer, it must be linked to the drain system. This may be accomplished by connecting the drain pipe to a drain hose or a standpipe.
To attach the drain pipe to a drain hose, the hose must be hooked up to the top of the drain pipe. The hose ought to then be routed to a close-by drain, equivalent to a sink drain or a ground drain. The hose must be secured in order that it doesn’t come unfastened and leak.
To attach the drain pipe to a standpipe, the standpipe must be put in subsequent to the washer. The drain pipe ought to then be linked to the standpipe utilizing a rubber washer. The washer must be positioned between the drain pipe and the standpipe to stop leaks.
As soon as the drain pipe is linked to the drain system, the washer might be examined to make sure that the water is draining correctly. To check the washer, run a cycle with no garments within the machine. The water ought to drain out of the machine and into the drain system with none leaks.
Drain Pipe Connection Choices
When connecting a washer drain pipe to a drain, you’ll sometimes have two choices: a drain hose or a standpipe.
| Drain Hose | Standpipe |
|---|---|
| Connects on to the drain pipe | Requires set up subsequent to the washer |
| Simple to put in | Safer connection |
| Can be utilized for non permanent or everlasting installations | Usually used for everlasting installations |
How To Set up A Drain Pipe For Washing Machine
Putting in a drain pipe for a washer isn’t troublesome, but it surely does require some primary instruments and information of plumbing. In case you are not comfy working with plumbing, it’s best to name a professional plumber for help.
To put in a drain pipe for a washer, you have to the next supplies:
- A size of PVC pipe (1 1/2 inches in diameter)
- A PVC pipe cutter
- A PVC glue
- A drain hose from the washer
- A clamp or hose clamp to safe the drain hose to the drain pipe
Upon getting gathered your supplies, you may start the set up course of.
- First, lower the PVC pipe to the specified size. The size of the pipe will rely upon the situation of the drain and the washer.
- Subsequent, apply PVC glue to the top of the pipe and insert the drain hose into the pipe.
- Safe the drain hose to the drain pipe with a clamp or hose clamp.
- Lastly, join the opposite finish of the PVC pipe to the drain.
As soon as the drain pipe is put in, you may take a look at the washer to make it possible for it’s draining correctly.
Individuals Additionally Ask
How do I do know if my washer drain pipe is clogged?
There are a couple of indicators that will point out that your washer drain pipe is clogged. These embrace:
- Water backing up into the washer
- Water leaking from the drain pipe
- A gradual draining washer
How do I unclog a washer drain pipe?
There are a couple of alternative ways to unclog a washer drain pipe. You possibly can attempt utilizing a drain snake, a chemical drain cleaner, or a plunger.
Can I set up a washer drain pipe myself?
Sure, you may set up a washer drain pipe your self you probably have some primary plumbing information. Nonetheless, if you’re not comfy working with plumbing, it’s best to name a professional plumber for help.
