The Honda Silverwing is a well-liked maxi-scooter that has been in manufacturing since 2001. It’s identified for its snug journey, ample space for storing, and highly effective engine. Nevertheless, like all automobiles, the Silverwing requires occasional upkeep, and one of the crucial widespread duties is changing the gas pump. Whereas this will likely look like a frightening job, it’s really fairly easy and may be accomplished in just a few hours with the suitable instruments and somewhat little bit of know-how.
Step one is to take away the seat and the facet panels. This gives you entry to the gas tank and the gas pump. After you have entry to the gas pump, you will have to disconnect the gas traces and {the electrical} connector. As soon as the gas pump is disconnected, you’ll be able to take away it from the gas tank. Watch out to not injury the gas pump or the gas tank when eradicating it.
After you have eliminated the gas pump, you’ll be able to examine it for injury. If the gas pump is broken, it is going to have to be changed. If the gas pump will not be broken, you’ll be able to clear it and reinstall it. To scrub the gas pump, you should utilize a carburetor cleaner or a gentle detergent. As soon as the gas pump is clear, you’ll be able to reinstall it within the gas tank. Make sure you join the gas traces and {the electrical} connector earlier than reinstalling the gas pump. As soon as the gas pump is reinstalled, you’ll be able to substitute the facet panels and the seat.
Figuring out the Location of the Gasoline Pump
The gas pump in a Honda Silverwing is positioned beneath the gas tank, making it accessible for inspection and substitute. Listed below are detailed steps on the way to establish the placement:
- Take away the Seat: Find the seat launch lever underneath the entrance of the seat and pull it as much as launch the seat. Carry the seat and set it apart.
- Find the Gasoline Tank: The gas tank is the big, silver element positioned above the engine. It has a gas line and wiring harness related to it.
- Disconnect Gasoline Line and Wiring: Rigorously disconnect the gas line and electrical wiring from the gas tank.
Use a wrench to loosen the gas line nut and pull the gas line off the tank. For {the electrical} wiring, find the connector and press the discharge tab to disconnect it. - Take away the Gasoline Tank: Grip the gas tank on each side and carry it straight up. Watch out to not spill any gas throughout this course of.
- Find the Gasoline Pump: As soon as the gas tank is eliminated, you will note the gas pump meeting on the underside of the gas tank. It’s usually a cylindrical or square-shaped element with gas traces and electrical connectors hooked up to it.
| Merchandise | Description |
|---|---|
| Gasoline Tank | The big, silver element positioned above the engine |
| Gasoline Pump | The cylindrical or square-shaped element positioned on the underside of the gas tank |
| Gasoline Line | The hose that connects the gas pump to the gas tank |
| Electrical Wiring | The wires that join the gas pump to {the electrical} system |
Making ready the Motorbike for Upkeep
Security Precautions
Earlier than starting any upkeep, guarantee your security by carrying correct protecting gear and dealing in a well-ventilated space. Permit the engine to chill utterly to forestall burns.
Instruments and Supplies Required
- Socket wrench set
- Screwdriver set
- Funnel
- Drain pan
Detailed Directions for Eradicating the Gasoline Pump
To entry the gas pump, comply with these steps:
1. Disconnect the Battery
Find the battery and disconnect the destructive terminal to forestall electrical hazards.
2. Take away the Gasoline Tank
Unscrew the gas tank mounting bolts and thoroughly carry the tank off the motorbike. Assist the tank with a stand or place heavy objects round it to forestall tipping. Use this chance to examine the gas traces and connections for any injury or leaks.
| Gasoline Tank Mounting Bolt Location | Bolt Removing Approach |
|---|---|
| Beneath the tank, close to the seat | Use a socket wrench to loosen the bolts |
| Beside the gas cap | Use a screwdriver to take away the bolts |
3. Find the Gasoline Pump
With the gas tank eliminated, you will note the gas pump meeting mounted on the left facet of the engine. It’s usually lined by a protecting cowl or housing.
Disassembly of the Rear Fairings
1. Begin by eradicating the rearmost seat part. That is normally held in place by a few bolts, which may be loosened with a socket wrench. As soon as the bolts are eliminated, carry the seat part off and set it apart.
2. Now, take away the rear facet fairings. These are usually held in place by a mix of bolts and clips. First, take away the bolts which are seen alongside the highest and sides of the fairings. Then, fastidiously pry the fairings away from the bike, beginning on the backside and dealing your method up. Watch out to not injury the fairings or the clips that maintain them in place.
3. Eradicating the Gasoline Pump Cowl
3. As soon as the facet fairings are eliminated, you will note the gas pump cowl. It is a black plastic cowl that’s positioned on the left facet of the bike, slightly below the gas tank. To take away the quilt, you will have to take away the 4 bolts that maintain it in place. These bolts are positioned on the highest and backside of the quilt.
As soon as the bolts are eliminated, fastidiously carry the quilt off and set it apart. You’ll now have entry to the gas pump.
| Bolt Measurement | Location |
|---|---|
| 8mm | High of canopy |
| 10mm | Backside of canopy |
Removing of the Airbox and Throttle Our bodies
**1. Disconnect the battery.** That is at all times step one when engaged on any electrical element in your motorbike. Find the destructive battery terminal and loosen the nut that secures the cable. Take away the cable from the terminal.
**2. Take away the seat.** The seat is held in place by two bolts on the rear of the seat. Loosen the bolts and carry the seat off of the motorbike.
**3. Take away the airbox cowl.** The airbox cowl is positioned on the entrance of the airbox. It’s held in place by 4 bolts. Take away the bolts and carry the quilt off of the airbox.
**4. Take away the airbox.** The airbox is held in place by 4 bolts. Take away the bolts and carry the airbox out of the motorbike. You might have to disconnect the air consumption hose from the airbox in an effort to take away it.
a. Disconnect the throttle cables from the throttle our bodies.
b. Take away the bolts that safe the throttle our bodies to the consumption manifold.
c. Rigorously carry the throttle our bodies off of the consumption manifold. Watch out to not injury the throttle place sensor or the injector.
**5. Take away the throttle our bodies.** The throttle our bodies are held in place by 4 bolts. Take away the bolts and carry the throttle our bodies off of the consumption manifold.
Disconnecting the Gasoline Strains
As soon as the gas tank is eliminated, you will have to disconnect the gas traces from the gas pump. There are two gas traces related to the gas pump: the availability line and the return line. The availability line is the bigger of the 2 traces and is related to the highest of the gas pump. The return line is the smaller of the 2 traces and is related to the underside of the gas pump.
To disconnect the gas traces, use a pair of pliers to squeeze the discharge tabs on the gas line connectors. As soon as the discharge tabs are squeezed, pull the gas line connectors off of the gas pump. Watch out to not injury the gas traces or the gas pump when disconnecting the gas traces.
As soon as the gas traces are disconnected, you’ll be able to take away the gas pump from the motorbike.
Relieving Gasoline Strain
Earlier than disconnecting the gas traces, you will need to relieve the gas stress within the gas system. To do that, begin the engine and let it idle for a couple of minutes. Then, flip off the engine and disconnect the destructive battery terminal.
Security Precautions
When engaged on the gas system, you will need to take the next security precautions:
- Work in a well-ventilated space.
- Put on eye safety and gloves.
- Don’t smoke or work close to open flames.
- Have a fireplace extinguisher close by.
Elements Identification
The next desk identifies the components of the gas pump and gas traces:
| Half | Description |
|---|---|
| Gasoline pump | The gas pump is a small, electrical pump that provides gas to the engine. |
| Provide line | The availability line is the bigger of the 2 gas traces and is related to the highest of the gas pump. |
| Return line | The return line is the smaller of the 2 gas traces and is related to the underside of the gas pump. |
Detaching the Gasoline Tank
To entry the gas pump, you will need to first detach the gas tank. Observe these steps:
- Disconnect the gas line from the tank. You might want a pair of pliers to loosen the hose clamp.
- Find the gas tank bolts, usually positioned on the perimeters and entrance of the tank.
- Take away the gas tank bolts utilizing a socket wrench.
- Rigorously carry the gas tank up and away from the motorbike.
- Set the gas tank apart in a secure place.
- Disconnect {the electrical} connectors from the gas pump. There could also be a number of connectors, so make sure you disconnect all of them.
Eradicating the Gasoline Pump
- Find the gas pump mounting bolts, usually positioned on the underside of the gas pump.
- Take away the gas pump mounting bolts utilizing a socket wrench.
- Gently pull the gas pump out of the tank.
- Examine the gas pump for any injury or particles.
- If essential, substitute the gas pump with a brand new one.
- Reinstall the gas pump within the reverse order of removing.
After you have changed or inspected the gas pump, you’ll be able to reattach the gas tank by following the steps in reverse order.
Inspecting the Gasoline Pump Location
Finding the gas pump on a Honda Silverwing requires an intensive inspection of the gas system. Here is an in depth information on the way to proceed:
1. Security Precautions
Earlier than commencing any work, make sure the car is parked on a steady floor and the engine is turned off.
2. Find the Gasoline Tank
Establish the gas tank, which is usually located underneath the rider’s seat. Take away any panels or bolts that safe it to entry the gas pump.
3. Disconnect the Gasoline Strains
Find and disconnect the gas traces related to the gas pump. Use warning as gas could spill.
4. Take away the Gasoline Pump Meeting
Unscrew the bolts or clips holding the gas pump meeting in place. Rigorously carry the meeting out of the gas tank.
5. Examine the Gasoline Pump
Look at the gas pump for any seen injury or corrosion. Confirm its electrical connections and guarantee they’re safe.
6. Take a look at the Gasoline Pump
If attainable, join the gas pump to an influence supply and check its performance by listening for a buzzing sound or observing gas circulation.
7. Verify the Gasoline Filter (Non-compulsory)
Many Honda Silverwing fashions have an inline gas filter positioned close to the gas pump. Examine the filter for clogs or particles and substitute it if essential.
| Gasoline Filter Inspection Steps: |
|---|
| – Disconnect the gas filter from the gas traces. |
| – Verify for dust or particles contained in the filter. |
| – Use compressed air or a gas injector cleaner to scrub the filter. |
| – If the filter is clogged or broken, substitute it with a brand new one. |
Reconnecting Elements
After changing the gas pump, it is time to reconnect the assorted elements you disconnected earlier. Begin by reattaching the gas pump to the gas tank. Use the bolts you eliminated earlier to safe it in place. As soon as the gas pump is in place, reconnect the gas traces. Make certain the traces are securely hooked up and there are not any leaks. Subsequent, reconnect {the electrical} connectors to the gas pump. Lastly, reattach the seat and another elements you eliminated in the course of the course of.
8. Reattaching the Gasoline Tank
When reattaching the gas tank, make sure you use a brand new gasket to make sure a correct seal. Begin by aligning the tank over the body after which fastidiously decrease it into place. As soon as the tank is in place, safe it with the bolts you eliminated earlier. Subsequent, reconnect the gas traces and electrical connectors to the tank. Lastly, reattach the seat and another elements you eliminated in the course of the course of.
Extra Suggestions
Listed below are some extra ideas for changing the gas pump:
- Use a clear work space to keep away from contaminating the brand new gas pump.
- Take your time and comply with the directions fastidiously.
- Should you’re not snug working in your car, do not hesitate to take it to a certified mechanic.
Testing the Gasoline Pump Operation
To check the gas pump operation, you will have a multimeter and a jumper wire.
- Disconnect the destructive battery terminal.
- Find the gas pump relay.
- Take away the gas pump relay from its socket.
- Join one finish of the jumper wire to the constructive terminal of the battery.
- Join the opposite finish of the jumper wire to the terminal on the gas pump relay that’s related to the gas pump.
- Flip the ignition key to the “on” place.
- Pay attention for the gas pump to run.
- If the gas pump doesn’t run, examine the fuse for the gas pump.
- If the fuse is nice, substitute the gas pump.
Extra Troubleshooting Suggestions
| Symptom | Doable Trigger | Answer |
|---|---|---|
| Engine begins and runs for just a few seconds, then dies | Gasoline pump will not be delivering sufficient gas | Change the gas pump |
| Engine begins and runs, however hesitates or stalls underneath load | Gasoline pump will not be delivering sufficient gas | Change the gas pump |
| Engine doesn’t begin | Gasoline pump will not be delivering any gas | Verify the gas pump fuse. If the fuse is nice, substitute the gas pump |
Honda Silverwing: Accessing the Gasoline Pump With out Removing
Accessing the gas pump on a Honda Silverwing requires some mechanical information and the suitable instruments.
To start, find the gas tank launch lever and carry the tank to show the gas traces and electrical connectors. Disconnect these elements fastidiously.
Subsequent, establish the gas filter, which is positioned close to the underside of the gas tank. Disconnect the gas traces from the filter and take away the filter meeting.
With the gas filter eliminated, you should have entry to the gas pump. The pump is held in place by a sequence of bolts or screws. Rigorously take away these fasteners and carry the gas pump out of the tank.
When changing the gas pump, make sure you use a brand new gasket or O-ring to make sure a correct seal. Tighten the bolts or screws securely and reconnect the gas traces and electrical connectors.
Lastly, decrease the gas tank again into place and reconnect the gas tank launch lever.
Folks Additionally Ask
How troublesome is it to vary the gas pump on a Honda Silverwing?
The problem of adjusting the gas pump on a Honda Silverwing will depend on your mechanical expertise and expertise. In case you are not snug working by yourself motorbike, it’s best to depart it to knowledgeable mechanic.
What instruments do I want to vary the gas pump on a Honda Silverwing?
You’ll need a set of screwdrivers, a wrench, and a pair of pliers to vary the gas pump on a Honda Silverwing. You may additionally want a gas filter wrench to take away the gas filter.
Can I take advantage of any gas pump for my Honda Silverwing?
No, you need to solely use a gas pump that’s particularly designed on your specific mannequin of Honda Silverwing. Utilizing the incorrect gas pump can injury your motorbike.
