Changing a fan in your Asus GL-753V gaming laptop computer generally is a daunting activity, however with the precise directions, it may be carried out comparatively simply. You do not must be an expert restore technician, and you do not want any particular instruments, only a set of screwdrivers and some minutes of your time.
To start, you will have to take away the again panel of your laptop computer. To do that, merely unscrew the screws which can be holding it in place and carry it off. As soon as the again panel is eliminated, you can see the fan. It is often situated close to the middle of the laptop computer, and it is often held in place by 4 screws. Unscrew these screws and thoroughly carry the fan out of its housing.
Now, you will want to put in the brand new fan. Merely place the brand new fan within the housing and tighten the screws that maintain it in place. Watch out to not overtighten the screws, or you might harm the fan. As soon as the brand new fan is put in, you possibly can put the again panel again in your laptop computer and screw it into place. Now, your laptop computer needs to be operating cooler and quieter.
Figuring out Fan Failure
The Asus GL-753V is a robust gaming laptop computer that requires ample cooling to keep up optimum efficiency. In case your laptop computer is experiencing overheating points, it is important to find out if the fan is functioning appropriately. Here is an in depth information that can assist you establish fan failure:
1. Bodily Examination
Visible Inspection: Examine the fan blades for any bodily harm, corresponding to cracks, free blades, or particles accumulation. A broken fan might produce rattling or grinding noises.
Handbook Rotation: Gently rotate the fan blades together with your finger to test for smoothness. The blades ought to spin freely with none obstructions. If the fan feels stiff or resists motion, it could point out a bearing concern.
Listening Take a look at: Energy on the laptop computer and pay attention attentively to the fan space. A wholesome fan ought to produce a constant airflow sound at a average quantity. If you happen to hear uncommon noises, corresponding to loud grinding or rattling, it is a signal of potential fan failure.
| Remark | Attainable Fan Failure Signs |
|---|---|
| Visible Inspection | Cracks, free blades, particles accumulation |
| Handbook Rotation | Stiffness, resistance to motion |
| Listening Take a look at | Loud grinding, rattling, extreme fan noise |
Making ready for the Alternative
Earlier than making an attempt the alternative, collect the required instruments and supplies:
* A small Phillips-head screwdriver
* A set of alternative followers (particularly designed for the Asus GL-753V mannequin)
* A non-abrasive cleansing material
* A cooling pad or elevated floor for the laptop computer
* A pair of ESD-safe gloves (non-compulsory however beneficial)
Step-by-Step Elimination
1. Be sure that the laptop computer is powered off and disconnected from all exterior gadgets.
2. Flip the laptop computer the other way up and take away the underside cowl utilizing the Phillips-head screwdriver. Find the followers, that are usually located on the backside of the laptop computer chassis.
3. Fastidiously disconnect the fan energy connectors from the motherboard. Word the orientation of the connectors for correct reassembly.
4. Take away the screws that safe the followers to the chassis.
5. Gently carry the followers out of their housing.
6. Use a non-abrasive cleansing material to take away any mud or particles from the fan housing and the encircling space. This can assist stop any buildup that would have an effect on the brand new followers’ efficiency.
Disassembling the Laptop computer
To entry the fan in your Asus GL-753v, you will have to disassemble the laptop computer. Listed here are the steps to do that:
- Energy off the laptop computer and unplug it from any energy sources.
- Take away the battery by sliding the battery launch latch and lifting the battery out of the laptop computer.
- Take away the screws from the underside of the laptop computer. There will probably be a number of screws, so watch out to not miss any.
- As soon as all of the screws are eliminated, you possibly can fastidiously pry the underside cowl off the laptop computer. Watch out to not harm the quilt or any of the elements contained in the laptop computer.
Disconnecting the Fan
After you have the underside cowl off, you will have to disconnect the fan. Listed here are the steps to do that:
- Find the fan. It will likely be a small, sq. part with a wire connected to it.
- Disconnect the wire from the fan by gently pulling on the connector. Watch out to not harm the connector or the wire.
- As soon as the wire is disconnected, you possibly can take away the fan by unscrewing the screws that maintain it in place.
| Steps | Description |
|---|---|
| 1 | Energy off the laptop computer and unplug it from any energy sources. |
| 2 | Take away the battery by sliding the battery launch latch and lifting the battery out of the laptop computer. |
| 3 | Take away the screws from the underside of the laptop computer. There will probably be a number of screws, so watch out to not miss any. |
| 4 | As soon as all of the screws are eliminated, you possibly can fastidiously pry the underside cowl off the laptop computer. Watch out to not harm the quilt or any of the elements contained in the laptop computer. |
| 5 | Find the fan. It will likely be a small, sq. part with a wire connected to it. |
| 6 | Disconnect the wire from the fan by gently pulling on the connector. Watch out to not harm the connector or the wire. |
| 7 | As soon as the wire is disconnected, you possibly can take away the fan by unscrewing the screws that maintain it in place. |
Finding the Defective Fan
To establish the defective fan, comply with these steps:
-
Hearken to fan noises: When a fan begins to fail, it typically makes uncommon noises, corresponding to rattling, buzzing, or clicking.
-
Examine fan vibration: Place your hand on the again of the laptop computer close to the fan vents. If the laptop computer vibrates excessively, it may point out a defective fan.
-
Use diagnostic software program: Run a laptop computer diagnostic program that may detect fan speeds and temperatures. If a fan isn’t spinning appropriately or is overheating, the software program will establish it.
-
Detailed Fan Inspection:
-
Disconnect the laptop computer from the facility outlet.
-
Take away the underside panel of the laptop computer. This often includes unscrewing just a few screws.
-
Find the cooling system. It usually consists of warmth pipes, a warmth sink, and a number of followers.
-
Establish the defective fan. Look at the followers for any seen harm, corresponding to damaged blades, free wires, or extreme mud accumulation.
-
Examine fan rotation. Gently attempt to rotate the fan blades. If a fan is caught or rotates with problem, it’s probably defective.
-
Measure fan voltage and present. When you’ve got a multimeter, you possibly can measure the voltage and present provided to the fan. If the readings are considerably completely different from the specs, it signifies {an electrical} concern with the fan.
-
Examine cooling vents. Make sure the cooling vents on the laptop computer’s exterior are away from any blockages, corresponding to mud or particles.
-
Detaching the Outdated Fan
To be able to detach the previous fan, you will want to take away all of the screws securing it to the laptop computer casing. As soon as the screws have been eliminated, you possibly can fastidiously carry the fan out of the casing. Watch out to not harm any of the wires or elements connected to the fan.
Step 1: Find the Fan
The fan is usually situated within the backside of the laptop computer casing. It will likely be coated by a plastic shroud that you will want to take away earlier than you possibly can entry the fan.
Step 2: Take away the Screws
The fan is usually secured to the casing by 4 screws. Find these screws and take away them utilizing a screwdriver.
Step 3: Raise the Fan Out
As soon as the screws have been eliminated, you possibly can fastidiously carry the fan out of the casing. Watch out to not harm any of the wires or elements connected to the fan.
Step 4: Disconnect the Wires
The fan is usually related to the motherboard by two wires. Disconnect these wires from the motherboard.
Step 5: Take away the Fan
As soon as the wires have been disconnected, you possibly can utterly take away the fan from the laptop computer.
| Screw Location | Variety of Screws |
|---|---|
| Entrance of Fan | 2 |
| Again of Fan | 2 |
Putting in the New Fan
With the previous fan eliminated, it is time to set up the brand new one. Fastidiously align the brand new fan with the mounting holes on the heatsink. The fan ought to match snugly into place. As soon as the fan is aligned, safe it with the screws that have been eliminated earlier. Remember to tighten the screws securely, however don’t overtighten them.
Changing the Thermal Paste
Earlier than putting in the brand new fan, it’s a good suggestion to exchange the thermal paste that was utilized to the heatsink. Thermal paste helps to conduct warmth away from the CPU and into the heatsink. Over time, thermal paste can dry out and develop into much less efficient. Changing the thermal paste will assist to make sure that the brand new fan is ready to cool the CPU successfully.
To exchange the thermal paste, merely apply a small quantity of recent thermal paste to the middle of the heatsink. Use a cotton swab or your finger to unfold the thermal paste evenly over the floor of the heatsink. As soon as the thermal paste is utilized, fastidiously place the brand new fan on prime of the heatsink.
Reconnecting the Wires
The following step is to reconnect the wires to the brand new fan. The fan may have two wires, a crimson wire and a black wire. The crimson wire needs to be related to the constructive terminal on the motherboard, and the black wire needs to be related to the damaging terminal. As soon as the wires are related, the fan ought to begin spinning.
Testing the Fan
As soon as the brand new fan is put in and the wires are related, you will need to take a look at the fan to ensure that it’s working correctly. To check the fan, merely boot up the pc and enter the BIOS. Within the BIOS, it is best to have the ability to see the fan velocity. The fan velocity needs to be round 2000 RPM. If the fan velocity isn’t round 2000 RPM, then the fan will not be working correctly and it is best to troubleshoot the issue.
Reassembling the Laptop computer
As soon as the brand new fan is put in, it is time to reassemble the laptop computer. Comply with these steps in reverse order of the disassembly course of:
7. Change the Motherboard
Fastidiously align the motherboard with the bottom of the laptop computer and gently decrease it into place. Be sure that all of the connectors and ports are correctly aligned.
Safe the motherboard utilizing the screws and gently tighten them till comfortable. Watch out to not overtighten the screws, as this might harm the motherboard.
Change the battery connector on the motherboard by gently pushing down on either side of the connector till it snaps into place.
Reattach the keyboard connector by aligning it with the port on the motherboard and gently urgent down till it clicks into place.
Reconnect the touchpad connector in the identical method because the keyboard connector.
Change the Wi-Fi card connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reconnect the webcam connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Change the audio jack connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reconnect the facility button connector by aligning it with the port on the motherboard and gently urgent down till it clicks into place.
Change the USB port connectors by aligning them with the ports on the motherboard and gently pushing them down till they click on into place.
Reattach the HDMI port connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reconnect the Ethernet port connector by aligning it with the port on the motherboard and gently urgent it down till it clicks into place.
Change the VGA port connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reattach the SATA connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Change the M.2 SSD connector by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Reattach the CMOS battery by aligning it with the port on the motherboard and gently pushing it down till it clicks into place.
Change the CPU heatsink by aligning it with the CPU socket on the motherboard and gently urgent down till it clicks into place.
Safe the CPU heatsink utilizing the screws and gently tighten them till comfortable. Watch out to not overtighten the screws, as this might harm the CPU.
Verifying Profitable Alternative
Step 8: Re-Set up the Again Panel and Battery
As soon as the fan has been efficiently changed, it is important to re-install the again panel and battery to finish the restore. Comply with these detailed steps fastidiously to make sure correct set up:
- Align the again panel with the chassis of the laptop computer, guaranteeing that every one tabs and slots are in place.
- Gently press across the edges of the again panel to safe it into place. Be certain it’s firmly seated and there are not any gaps or misalignments.
- Retrieve the battery from a protected storage location.
- Slide the battery again into its designated compartment throughout the laptop computer.
- Safe the battery by sliding the latch or lever into the locked place.
Guaranteeing Performance
After reassembling the laptop computer, it is essential to confirm that the brand new fan is functioning appropriately. Energy on the system and observe the next:
- Examine for Noise Discount: Hear attentively for any uncommon noises or rattling sounds coming from the fan. A correctly put in fan ought to function easily and quietly.
- Monitor System Temperatures: Use a temperature monitoring software program or utility to trace the CPU and GPU temperatures. The temperatures needs to be inside regular working ranges.
- Run a Stress Take a look at: Run a stress take a look at utility or benchmark to place the laptop computer underneath load. This can take a look at the fan’s potential to successfully dissipate warmth and keep optimum temperatures.
If all these checks are passable, you’ve got efficiently changed the fan in your Asus GL-753v and restored it to its optimum efficiency.
Troubleshooting Ideas
If you happen to encounter any points whereas altering out the fan in your ASUS GL-753V, listed below are some troubleshooting ideas:
9. Examine the Fan Blades
Totally examine the fan blades for any harm, corresponding to cracks or bent sections. Broken blades can create an imbalance whereas spinning, inflicting extreme noise or diminished airflow. If any harm is current, change the fan with a brand new one.
To test the fan blades for harm, maintain the fan in your hand and rotate it slowly. Search for any seen cracks or bends within the blades. If you happen to discover any harm, change the fan.
You may also use a flashlight to examine the fan blades for harm. Shine the flashlight by way of the blades and search for any cracks or bends. If you happen to discover any harm, change the fan.
In case you are uncertain whether or not or not the fan blades are broken, you possibly can take the pc to a certified technician for additional inspection.
| Harm | Impact | Answer |
|---|---|---|
| Cracked blades | Extreme noise, diminished airflow | Change fan |
| Bent blades | Imbalance whereas spinning, diminished airflow | Change fan |
Security Precautions
Earlier than you start, you will need to comply with these security precautions to make sure your security and forestall harm to your Asus GL-753V:
- Unplug your laptop computer from any energy supply and take away the battery.
- Put on anti-static gloves or a wrist strap to forestall electrostatic discharge (ESD).
- Use a clear and well-lit workspace.
- Deal with the fan with care to keep away from harm.
- Don’t contact the fan blades or the copper coils.
- Don’t try to restore the fan your self if you’re not snug doing so.
- In case you are uncertain about any of the steps, seek the advice of a certified technician.
- Get rid of the previous fan correctly.
- Wash your arms totally after dealing with the fan.
- Permit the laptop computer to chill down utterly earlier than reassembling it.
10. Putting in the New Fan
As soon as the previous fan is eliminated, it’s time to set up the brand new fan. To do that, comply with these steps:
- Align the brand new fan with the fan header on the motherboard.
- Gently press down on the fan till it clicks into place.
- Join the fan cable to the motherboard.
- Safe the fan with the screws offered.
- Reassemble the laptop computer.
As soon as the laptop computer is reassembled, plug it again into energy and switch it on. The brand new fan ought to now be functioning correctly.
The right way to Change Out a Fan in My ASUS GL-753V
The ASUS GL-753V is a gaming laptop computer that’s identified for its highly effective efficiency and glossy design. Nonetheless, like all laptops, it’s prone to overheating, which might result in decreased efficiency and even harm to the laptop computer. Probably the most frequent causes of overheating is a defective fan, which could be simply changed by following these steps:
- Energy down the laptop computer and unplug it from the facility outlet.
- Flip the laptop computer over and take away the screws that maintain the underside panel in place.
- As soon as the panel is eliminated, find the fan and disconnect the facility cable.
- Unscrew the fan from the laptop computer and take away it.
- Change the previous fan with the brand new fan and screw it into place.
- Reconnect the facility cable to the fan.
- Change the underside panel and screw it into place.
Individuals Additionally Ask
Why is my ASUS GL-753V overheating?
There are a number of the reason why your ASUS GL-753V could also be overheating. Among the most typical causes embody:
- A defective fan
- A clogged air vent
- A excessive ambient temperature
- A demanding workload
How can I stop my ASUS GL-753V from overheating?
There are a number of issues you are able to do to forestall your ASUS GL-753V from overheating, together with:
- Hold the air vents clear and away from any obstructions.
- Use the laptop computer in a cool, well-ventilated atmosphere.
- Keep away from putting the laptop computer on a gentle floor, corresponding to a blanket or pillow, which might block the air vents.
- Scale back the workload on the laptop computer by closing any pointless packages or tabs.
- Think about using a cooling pad to assist dissipate warmth from the laptop computer.
The place can I discover a alternative fan for my ASUS GL-753V?
You could find a alternative fan to your ASUS GL-753V from a number of on-line retailers, together with Amazon, Newegg, and eBay. Remember to buy a fan that’s suitable together with your particular laptop computer mannequin.
