A leaky combo tub/bathe deal with is usually a nuisance, inflicting water to drip and waste. If you happen to’re unsure repair it your self, don’t fret – it is a comparatively straightforward process that may be accomplished in a couple of easy steps.
First, you may want to collect a couple of instruments. You may want a screwdriver, a wrench, and a pair of pliers. You may additionally want a brand new washer or O-ring, relying on the kind of combo tub/bathe deal with you may have. After you have your instruments, you’ll be able to start the restore course of.
First, flip off the water provide to the combo tub/bathe deal with. Then, take away the deal with by unscrewing the screws that maintain it in place. As soon as the deal with is eliminated, you’ll see the cartridge or stem that controls the water stream. If the cartridge or stem is broken, you may want to interchange it. In any other case, you’ll be able to merely substitute the washer or O-ring.
As soon as you’ve got changed the washer or O-ring, you’ll be able to reassemble the combo tub/bathe deal with. First, insert the cartridge or stem into the physique of the deal with. Then, screw the deal with again into place. Lastly, activate the water provide and verify for leaks. If there are not any leaks, you’ve got efficiently fastened your combo tub/bathe deal with!
Tightening the Packing Nut
If tightening the deal with nut or changing the cartridge fails to cease the leak, you may have to tighten or substitute the packing nut. The packing nut is a big, hexagonal nut positioned simply behind the deal with on the bathtub or bathe deal with. Over time, this nut can loosen, permitting water to seep previous the deal with and trigger a leak. To tighten the packing nut, observe these steps:
1. Take away the deal with. Use a screwdriver or Allen wrench to take away the screw that holds the deal with in place. As soon as the screw is eliminated, pull the deal with straight off the valve stem.
2. Find the packing nut. The packing nut is a big, hexagonal nut positioned simply behind the deal with. It’s normally product of brass or plastic.
3. Tighten the packing nut. Use a wrench to tighten the packing nut. Don’t overtighten the nut, as this might injury the valve. The nut must be tightened till it’s comfortable, however not so tight that it can’t be turned by hand.
4. Change the deal with. As soon as the packing nut is tightened, substitute the deal with by sliding it again onto the valve stem and securing it with the screw.
| Software | Required | Function |
|---|---|---|
| Screwdriver or Allen wrench | Sure | Take away the deal with screw |
| Wrench | Sure | Tighten the packing nut |
Adjusting the Deal with
If adjusting the packing nut does not cease the leak, chances are you’ll want to interchange the deal with washer. To do that:
- Flip off the water provide to the bathtub/bathe.
- Take away the deal with by unscrewing the set screw that holds it in place.
- Take away the previous deal with washer and substitute it with a brand new one.
- Reinstall the deal with and tighten the set screw.
- Activate the water provide and verify for leaks.
If the leak persists, chances are you’ll want to interchange the deal with stem. To do that:
- Flip off the water provide to the bathtub/bathe.
- Take away the deal with as described above.
- Unscrew the packing nut and take away the deal with stem.
- Change the previous deal with stem with a brand new one.
- Reinstall the packing nut and deal with.
- Activate the water provide and verify for leaks.
Ideas for Changing a Deal with Stem
Listed below are a couple of suggestions that will help you substitute a deal with stem efficiently:
| Tip | Description |
|---|---|
| Use the right measurement wrench. | Utilizing too small or too giant of a wrench can injury the stem. |
| Watch out to not overtighten the packing nut. | Overtightening the packing nut can injury the stem or the nut itself. |
| Flip the water on slowly after changing the stem. | This may assist forestall water hammer, which might injury the brand new stem. |
Repairing a Free Connection
A unfastened connection between the deal with and the valve stem could cause water to leak from the deal with. To repair this, you’ll need to tighten the connection.
Supplies:
- Adjustable wrench
- Screwdriver
Steps:
- Flip off the water provide to the bathtub/bathe.
- Take away the deal with cap by unscrewing it with a screwdriver.
- Use an adjustable wrench to tighten the packing nut that secures the deal with to the valve stem.
- Reinstall the deal with cap.
- Activate the water provide and verify for leaks.
- If the leak persists, chances are you’ll want to interchange the packing nut. To do that, use a wrench to unscrew the previous packing nut and substitute it with a brand new one. You’ll want to apply a small quantity of sealant to the brand new packing nut earlier than tightening it.
| Step | Motion |
|---|---|
| 1 | Flip off the water provide. |
| 2 | Take away the deal with cap. |
| 3 | Tighten the packing nut. |
| 4 | Reinstall the deal with cap. |
| 5 | Activate the water provide and verify for leaks. |
| 6 | Change the packing nut if mandatory. |
How To Repair A Leaky Combo Tub/Bathe Deal with
Combo tub/bathe handles are a typical supply of leaks in bogs. The leak is often attributable to a worn-out washer or O-ring, which will be simply changed. Right here’s a step-by-step information on repair a leaky combo tub/bathe deal with:
- Flip off the water provide to the bathtub/bathe.
- Take away the deal with by pulling it straight off.
- Use a screwdriver to take away the screws that maintain the deal with meeting in place.
- Pull the deal with meeting out of the wall.
- Change the washer or O-ring.
- Reassemble the deal with meeting and tighten the screws.
- Reinstall the deal with.
- Activate the water provide and verify for leaks.
Folks additionally ask about How To Repair A Leaky Combo Tub/Bathe Deal with
How do I do know if my tub/bathe deal with is leaking?
There are a couple of indicators that will point out a leak in your tub/bathe deal with. These embody:
Can I repair a leaky tub/bathe deal with myself?
Sure, fixing a leaky tub/bathe deal with is a comparatively straightforward restore that may be executed by most owners. Nevertheless, if you’re not comfy working with plumbing, it’s best to name a plumber.
How a lot does it value to repair a leaky tub/bathe deal with?
The fee to repair a leaky tub/bathe deal with will differ relying on the kind of deal with and the extent of the leak. Nevertheless, most repairs will be executed for below $50.
