Putting in an over-the-range microwave is an effective way to avoid wasting area and enhance the performance of your kitchen. Nonetheless, it is vital to decide on the right dimension microwave in your area and to put in it correctly. In any other case, you possibly can find yourself with a microwave that does not match or that is not working correctly.
Earlier than you buy an over-the-range microwave, you will have to measure the area the place you intend to put in it. The microwave must be at the very least 30 inches large, 18 inches deep, and 6 toes excessive. You may additionally have to guarantee that there may be sufficient clearance above the microwave for it to vent correctly. As soon as you have chosen a microwave, you’ll be able to observe these steps to put in it:
1. Flip off the facility to the circuit that powers the microwave.
2. Take away the outdated microwave, if there may be one.
3. Set up the mounting bracket for the brand new microwave.
4. Hold the microwave on the mounting bracket.
5. Join the microwave to the facility provide.
6. Activate the facility to the circuit and take a look at the microwave.
Measuring for Correct Cupboard Placement
Earlier than you begin looking for an over-the-range microwave, it is vital to measure your current cupboard area to make sure a correct match. Here is what you want to do:
1. Decide the Top
Measure the peak of your current cupboard opening. The microwave ought to match snugly inside this opening, with about 1/2 inch of clearance on all sides.
2. Measure the Width
Measure the width of the cupboard opening on the backside, the place the microwave will relaxation on the countertop. Measure the width once more on the prime of the opening, the place the microwave will probably be secured to the cupboard. These measurements must be the identical or inside 1 / 4 inch of one another.
| Minimal Clearance | Most Clearance | |
|---|---|---|
| Left and Proper Sides | 1/2 inch | 1 inch |
| High | 0 inches | 1/4 inch |
| Backside | 30 inches above countertop | 36 inches above countertop |
3. Measure the Depth
Measure the depth of the cupboard opening from the entrance edge to the again wall. The microwave ought to match inside this depth, with about 1 inch of clearance on the again for air flow.
Securing the Microwave to the Cupboard
After getting positioned the microwave appropriately, it is time to safe it to the cupboard. This course of is essential to make sure that the microwave stays steady and prevents any accidents from occurring.
Step-by-step Information to Securing the Microwave:
1. Collect the Needed Instruments: Find the screws and mounting plate that got here along with your microwave. You may additionally want a screwdriver or energy drill.
2. Place the Mounting Plate: Place the mounting plate in opposition to the again of the microwave and align it with the screw holes on the microwave.
3. Safe the Plate: Utilizing the screws offered, screw the mounting plate firmly into place. Be sure that the plate is securely hooked up to the microwave.
4. Align the Microwave with the Cupboard: Rigorously carry the microwave and place it in entrance of the cupboard. Make it possible for the microwave is stage and centered.
5. Join the Mounting Brackets: In case your microwave got here with mounting brackets, join them to the mounting plate on the again and insert them into the slots on the cupboard.
6. Tighten the Brackets: Utilizing a screwdriver or energy drill, tighten the screws on the mounting brackets to safe the microwave firmly to the cupboard.
7. Double-Verify Stability: Gently shake the microwave to make sure it’s securely mounted and doesn’t transfer or wobble.
8. Join the Electrical and Air flow: Confer with the producer’s directions to correctly join {the electrical} outlet and air flow system in your microwave.
9. Ending Touches: If any screws or bolts are uncovered, cowl them with the ornamental caps or trims offered along with your microwave to reinforce its aesthetics and forestall sharp edges.
Methods to Set up a Right Measurement Over-the-Vary Microwave
Putting in an over-the-range microwave is an effective way to avoid wasting area and add performance to your kitchen. Nonetheless, it is vital to decide on the right dimension microwave in your area. If the microwave is simply too small, it will not be capable to accommodate your wants. If it is too massive, it is going to take up an excessive amount of area and should not match correctly.
To decide on the right dimension microwave, you want to measure the area the place you intend to put in it. You additionally want to think about the dimensions of your vary and the peak of your cupboards. After getting all of this data, you can begin looking for a microwave.
Listed here are some suggestions for selecting the right dimension over-the-range microwave:
- Measure the width of your vary. The microwave must be at the very least as large because the vary.
- Measure the peak of your cupboards. The microwave must be no taller than the cupboards.
- Contemplate the dimensions of your kitchen. A big microwave will take up extra space, so when you have a small kitchen, you could wish to select a smaller microwave.
- Take into consideration your wants. When you prepare dinner so much, it’s your decision a bigger microwave with extra options. When you solely use the microwave sometimes, you might be able to get away with a smaller, inexpensive mannequin.
After getting chosen the right dimension microwave, you’ll be able to start the set up course of. Listed here are some step-by-step directions on how you can set up an over-the-range microwave:
- Flip off the facility to the circuit that powers the microwave.
- Take away the outdated microwave, if there may be one.
- Set up the mounting bracket for the brand new microwave in keeping with the producer’s directions.
- Raise the brand new microwave onto the mounting bracket and safe it in place.
- Join the microwave to the facility provide.
- Activate the facility and take a look at the microwave.
