Think about the comfort of effortlessly sliding your Ford seat backwards and forwards to accommodate completely different drivers or cargo wants. Putting in an additional Ford seat L observe can rework your automobile right into a haven of customizable consolation and flexibility. This complete information will empower you with step-by-step directions, guaranteeing a seamless and profitable set up. Whether or not you are a seasoned mechanic or an adventurous DIY fanatic, put together to reinforce your driving expertise with this beneficial improve. Embark on this journey to unlock the total potential of your Ford seat’s mobility and personalization.
Earlier than delving into the set up course of, let’s collect the important instruments and supplies. You may want a set of metric wrenches, a socket set, a drill, drill bits, self-tapping screws, and naturally, the additional Ford seat L observe. Along with your arsenal of sources prepared, you’ll be able to proceed with confidence. Step one entails eradicating the prevailing seat out of your automobile. Rigorously disconnect the wiring harness and unbolt the seat from its mounting factors. As soon as the seat is eliminated, you may have clear entry to the world the place the additional L observe might be put in.
Now comes the exact set up of the additional Ford seat L observe. Place the L observe onto the seat base and align it precisely with the prevailing observe. Safe the L observe firmly utilizing the offered self-tapping screws. Make sure the screws are adequately tightened to stop any motion or rattling throughout use. As soon as the L observe is securely mounted, rigorously reinstall the seat into your automobile. Reconnect the wiring harness and bolt the seat again into its authentic place. With these steps meticulously adopted, you have efficiently put in the additional Ford seat L observe, increasing the vary of seat changes and elevating your driving consolation to new heights.
Finding the Current L Observe
To start, find the prevailing L observe in your Ford automobile. That is the observe that the seat rails slide backwards and forwards on. It’s usually positioned below the seat, and it could be lined by a plastic or steel trim panel. In case you are having hassle discovering the L observe, seek the advice of your automobile’s proprietor’s guide or seek for diagrams on-line.
After getting positioned the prevailing L observe, you’ll need to find out how a lot further observe you should set up. This can rely upon the kind of seat you’re putting in and the quantity of adjustment you need. Usually talking, you’ll need so as to add at the least 12 inches of observe to every facet of the seat.
Here’s a desk of measurements and strategies for a way a lot further L observe you could want:
| Seat Sort | Extra L Observe Wanted |
|---|---|
| Normal bench seat | 12 inches per facet |
| Bucket seat | 18 inches per facet |
| Racing seat | 24 inches per facet |
After getting decided how a lot further observe you want, you should purchase the suitable observe on-line or out of your native auto elements retailer.Assembling the Additional L Observe
Step 1: Collect Supplies
You’ll need the next supplies:
- Additional L observe
- L observe mounting bolts
- Socket wrench
Step 2: Put together the L Observe
Measure and mark the places for the mounting bolts on the L observe. Drill pilot holes for the bolts utilizing a drill bit that’s barely smaller than the bolts.
Step 3: Set up the Mounting Bolts
Insert the mounting bolts into the pilot holes and tighten them utilizing the socket wrench. Make sure that the bolts are tightened securely, however don’t overtighten them.
| Tightening Torque | Bolt Dimension |
|---|---|
| 10-12 ft-lbs | 1/4-20 bolts |
| 15-18 ft-lbs | 5/16-18 bolts |
| 20-25 ft-lbs | 3/8-16 bolts |
Step 4: Connect the L Observe to the Automobile
Align the L observe with the mounting holes on the automobile. Insert the mounting bolts into the holes and tighten them utilizing the socket wrench. Make sure that the L observe is securely hooked up.
Aligning and Attaching the L Observe
As soon as the L observe is reduce to the proper size, you will need to align it correctly earlier than attaching it to the ground. Use the next steps to make sure correct alignment:
- Place the L observe on the ground alongside the specified alignment.
- Verify for alignment utilizing a measuring tape or straightedge to make sure it’s parallel to the automobile’s body.
- Mark the placement of the mounting holes utilizing a pencil or marker.
For safe attachment, use the next process:
- Drill pilot holes on the marked places utilizing a drill bit that’s barely smaller than the diameter of the mounting bolts.
- Align the L observe with the pilot holes and insert the mounting bolts.
- Tighten the bolts utilizing a wrench or socket, guaranteeing they’re securely mounted.
| Materials | Amount | Size |
|---|---|---|
| L Observe | 2 | As per automobile necessities |
| Mounting Bolts | 8-10 (per L observe) | 1/2 inch |
| Drill Bit | 1 | 1/4 inch |
| Measuring Tape | 1 | N/A |
| Wrench or Socket | 1 | N/A |
Tightening the Carriage Bolts
That is the ultimate step within the set up course of. As soon as the bolts are tightened, the seat might be securely mounted to the L-track. To tighten the bolts, you’ll need a socket wrench or a field wrench. Begin by tightening the bolts finger-tight. As soon as the bolts are finger-tight, use the wrench to tighten them additional. Watch out to not overtighten the bolts, as this could harm the threads.
Here’s a desk summarizing the steps for tightening the carriage bolts:
| Step | Directions |
|---|---|
| 1 | Tighten the bolts finger-tight. |
| 2 | Use a wrench to tighten the bolts additional. |
| 3 | Watch out to not overtighten the bolts. |
Reinforcing the L Observe
Reinforcing the L observe is a necessary step to make sure the steadiness and sturdiness of your aftermarket seat set up. Here is an in depth information that will help you reinforce the L observe:
Supplies Required
| Part | Amount |
|---|---|
| 1/4″ x 1″ Metal Flat Bar | 2 |
| 1/4″ Bolts | 8 |
| Washers | 8 |
| Nuts | 8 |
Process
- Find Reinforcement Factors: Discover the prevailing weld nuts or mounting factors on the automobile’s flooring the place the unique seat observe was hooked up. These factors will function the reinforcement factors.
- Measure and Lower Flat Bars: Lower two items of 1/4" x 1" metal flat bar to a size that corresponds to the within width of the automobile’s flooring.
- Place Flat Bars: Place the flat bars alongside the within fringe of the ground, parallel to the prevailing L observe. Make sure that they align with the reinforcement factors.
- Safe Flat Bars: Utilizing 1/4" bolts, washers, and nuts, bolt the flat bars to the reinforcement factors. Tighten the bolts securely.
- Connect to L Observe: Place the L observe over the flat bars and safe it utilizing bolts, washers, and nuts. Tighten the bolts to the advisable torque specs.
- Extra Issues: In sure circumstances, equivalent to for heavy-duty functions or for putting in aftermarket seats with a big weight capability, you could want so as to add further help by welding the flat bars to the automobile’s flooring. Seek the advice of with a professional automotive skilled for correct welding directions.
Putting in the Seat on the L Observe
As soon as the L observe is put in, you’ll be able to start putting in the seat. To do that, you’ll need to:
- Align the seat with the L observe. Make it possible for the seat is going through the proper route and that the entrance of the seat is aligned with the entrance of the L observe.
- Carry the seat onto the L observe. Rigorously carry the seat onto the L observe and guarantee that it’s securely seated.
- Slide the seat ahead and backward. Slide the seat ahead and backward to guarantee that it strikes easily alongside the L observe.
- Tighten the seat bolts. Tighten the seat bolts to safe the seat to the L observe.
- Reinstall the seat covers. Reinstall the seat covers to cowl the seat bolts and provides the seat a completed look.
6. Alter the Seat Place
As soon as the seat is put in, you’ll be able to regulate the seat place to your liking. To do that, you should utilize the seat adjustment levers to maneuver the seat ahead and backward, up and down, and tilt the seatback.
7. Set up the Seat {Hardware}
The ultimate step is to put in the seat {hardware}. This consists of putting in the seat belt buckles, the seat belt retractors, and the seat belt anchors. The seat {hardware} is usually included with the seat, however you could have to buy it individually if you’re putting in an aftermarket seat.
Putting in the Seat Belt Buckles
To put in the seat belt buckles, you’ll need to:
Putting in the Seat Belt Retractors
To put in the seat belt retractors, you’ll need to:
Adjusting the Seat Place
To regulate the seat place, observe these steps:
- Find the seat adjustment levers. These are often positioned on the facet of the seat.
- Pull the lever ahead to maneuver the seat ahead.
- Push the lever again to maneuver the seat again.
- Elevate or decrease the seat cushion. To do that, pull up on the lever positioned on the entrance of the seat cushion.
- Tilt the seatback ahead or backward. To do that, pull up on the lever positioned on the rear of the seatback.
- Alter the lumbar help. To do that, flip the knob positioned on the facet of the seat.
- Alter the headrest. To do that, pull up on the lever positioned on the prime of the headrest.
- Save your seat place. To do that, press the “M” button on the seat adjustment panel.
Here’s a desk that summarizes the seat adjustment options:
| Function | How one can Alter |
|---|---|
| Transfer seat ahead | Pull lever ahead |
| Transfer seat again | Push lever again |
| Elevate or decrease seat cushion | Pull up on lever at entrance of seat cushion |
| Tilt seatback ahead or backward | Pull up on lever at rear of seatback |
| Alter lumbar help | Flip knob on facet of seat |
| Alter headrest | Pull up on lever at prime of headrest |
| Save seat place | Press “M” button on seat adjustment panel |
Security Precautions
Earlier than embarking on the set up course of, it’s crucial to prioritize security by adhering to the next precautions:
- Put on Protecting Gear: Don security glasses, gloves, and closed-toe footwear to attenuate the chance of damage.
- Disconnect the Battery: Disconnect the unfavourable terminal of your battery to stop electrical hazards in the course of the set up.
- Park on a Stage Floor: Park your automobile on a flat, steady floor to make sure it stays stationary all through the method.
- Help the Seat: Make the most of a jack stand or different appropriate help to stop the seat from falling whereas disconnected.
- Use Correct Instruments: Make use of the suitable instruments for every process, together with a socket wrench, torque wrench, and drill.
- Comply with Directions Rigorously: Seek advice from the producer’s directions or a good on-line information to make sure correct set up.
- Verify Tightness Often: As soon as put in, periodically verify the tightness of all bolts and screws to take care of security.
- Safe L Observe: Make sure the L observe is securely hooked up to the ground or brackets utilizing the required bolts and torque settings.
- Reattach Seat: Rigorously reattach the seat to the L observe, guaranteeing it slides easily and locks into place securely.
9. Verify Alignment and Tighten Bolts
Examine the alignment of the newly put in L observe to make sure it’s parallel to the prevailing observe. Use a measuring tape or ruler to confirm the distances and angles. Tighten all bolts and screws to the required torque values utilizing a torque wrench. This step ensures the L observe stays firmly in place and the seat might be adjusted easily and safely.
Troubleshooting Frequent Points
Should you encounter any points whereas putting in the additional Ford seat L observe, verify the next troubleshooting steps:
1. Observe Alignment
Make sure that the brand new L observe is correctly aligned with the prevailing one. Misalignment can forestall the seats from sliding easily.
2. Bolt Tightening
Confirm that each one bolts are securely tightened. Unfastened bolts could cause rattling and instability.
3. Particles Removing
Examine the observe for any particles or grime. Clear it completely to stop interference with seat motion.
4. Seat Compatibility
Verify that the seats you propose to make use of are appropriate with the L observe system. Incompatible seats might not match accurately.
5. Rail Extension
If you should lengthen the observe size, use appropriate rail extension brackets. Improper extension can weaken the observe energy.
6. Lubrication
Apply a skinny layer of lubricant to the observe to cut back friction and enhance seat sliding.
7. Wiring Obstructions
Make sure that there are not any wiring harnesses or cables obstructing the observe path. Keep away from harm throughout set up.
8. Security Precautions
At all times put on security glasses and gloves. Use correct lifting strategies to keep away from damage.
9. Device Necessities
Have all vital instruments accessible, together with a socket wrench, drill, and applicable fasteners.
10. Search Skilled Help
Should you encounter any persistent points or have any considerations, don’t hesitate to hunt skilled help from an skilled mechanic.
How To Set up Additional Ford Seat L Observe
To put in additional Ford seat L observe, you’ll need the next instruments and supplies:
- Socket wrench
- 10mm socket
- 13mm socket
- 15mm socket
- 18mm socket
- T40 Torx bit
- Flathead screwdriver
- Phillips head screwdriver
- New seat L observe
- Bolts (4x M10x1.5, 4x M12x1.75, 4x M14x2.0)
- Washers (4x M10, 4x M12, 4x M14)
- Lock nuts (4x M10, 4x M12, 4x M14)
After getting gathered the entire vital instruments and supplies, you’ll be able to observe these steps to put in the brand new seat L observe:
1. Take away the previous seat L observe. To do that, you’ll need to take away the 4 bolts that safe the seat L observe to the seat body. As soon as the bolts are eliminated, you’ll be able to carry the seat L observe off of the seat body.
2. Clear the seat body. As soon as the previous seat L observe is eliminated, you’ll need to scrub the seat body. This can assist to make sure that the brand new seat L observe is put in correctly.
3. Set up the brand new seat L observe. To do that, you’ll need to position the brand new seat L observe on the seat body. Make it possible for the brand new seat L observe is aligned correctly.
4. Safe the brand new seat L observe. As soon as the brand new seat L observe is aligned correctly, you’ll need to safe it to the seat body. To do that, you’ll need to insert the 4 bolts into the holes within the seat L observe and tighten them till they’re comfortable.
5. Check the brand new seat L observe. As soon as the brand new seat L observe is put in, you’ll need to check it to guarantee that it’s working correctly. To do that, you’ll need to take a seat within the seat and transfer the seat backwards and forwards. The seat ought to transfer easily and simply.
Individuals Additionally Ask
What’s a seat L observe?
A seat L observe is a steel observe that’s mounted to the seat body. The seat L observe permits the seat to maneuver backwards and forwards.
How do I do know if I would like to interchange my seat L observe?
In case your seat shouldn’t be transferring easily or simply, it could be vital to interchange the seat L observe.
How a lot does it price to interchange a seat L observe?
The price to interchange a seat L observe will range relying on the make and mannequin of your automobile. Nonetheless, you’ll be able to anticipate to pay between $100 and $300 for the elements and labor.
