If you’re planning on buying a case to your iPad, you will need to know the right measurement. The identical goes if you happen to simply wish to know the mannequin of your iPad. There are just a few alternative ways to measure the scale of your iPad, relying on whether or not you’ve got the system readily available or not. On this article, we’ll give you step-by-step directions on the way to measure the scale of your iPad, whatever the mannequin.
When you have your iPad readily available, the best technique to measure the scale is to make use of a ruler or measuring tape. Measure the size and width of the iPad, from edge to edge. The size is the measurement from the highest to the underside of the iPad, whereas the width is the measurement back and forth. After you have the size and width, you should utilize the next desk to find out the scale of your iPad:
| Size (in) | Width (in) | Dimension |
|---|---|---|
| 9.7 | 7.0 | 9.7-inch iPad |
| 10.2 | 7.5 | 10.2-inch iPad (seventh and eighth technology) |
| 10.5 | 7.9 | 10.5-inch iPad Professional |
| 11.0 | 8.1 | 11-inch iPad Professional (1st, 2nd, and third technology) |
| 12.9 | 8.7 | 12.9-inch iPad Professional (1st, 2nd, third, 4th, and fifth technology) |
Measuring the Bodily Dimensions
Earlier than discussing the technical dimensions of an iPad, it is important to grasp the bodily measurements. These dimensions immediately influence the system’s portability, consolation of use, and compatibility with equipment. Here is an in depth information on measuring the bodily dimensions of an iPad.
1. Size and Width
To measure the size and width of the iPad, you may want a ruler or measuring tape. Place the ruler alongside the system’s longest facet, from one edge to the opposite. Document the measurement in inches or centimeters. Repeat the method for the width, which is the shorter facet perpendicular to the size. The size usually corresponds to the peak of the iPad when held in portrait mode, whereas the width corresponds to the width in portrait mode or the peak in panorama mode.
2. Top
The peak of an iPad is measured by inserting the system on a flat floor with the display screen dealing with up. Use a ruler or measuring tape to measure from the underside edge to the highest fringe of the system. This measurement is often taken when the iPad is in portrait mode. The peak is necessary for figuring out the system’s general measurement and for guaranteeing compatibility with circumstances and docks.
3. Thickness
To measure the thickness, place the iPad on its facet and use a ruler or caliper to measure from the highest edge to the underside edge. This measurement is usually taken on the thickest level of the system, which can differ relying on the mannequin and design. The thickness can influence the system’s portability and luxury of holding it for prolonged durations.
Calculating the Display Dimension Diagonally
The commonest methodology for measuring the scale of an iPad is to calculate the display screen measurement diagonally. That is achieved by measuring the space from one nook of the display screen to the alternative nook. The result’s the diagonal size of the display screen, which is usually expressed in inches.
To calculate the display screen measurement diagonally, you will want a ruler or measuring tape. Place the ruler or measuring tape alongside the diagonal of the display screen, from one nook to the alternative nook. Guarantee that the ruler or measuring tape is straight and that it isn’t touching the bezel of the display screen.
After you have measured the diagonal size of the display screen, you should utilize the next desk to find out the scale of your iPad:
| Diagonal Size (inches) | iPad Mannequin |
|---|---|
| 7.9 | iPad mini |
| 9.7 | iPad (2018) |
| 10.2 | iPad (2021) |
| 10.5 | iPad Air (2019) |
| 11 | iPad Professional (2018) |
| 12.9 | iPad Professional (2018) |
Figuring out the Side Ratio
To find out the facet ratio of an iPad, you will need to measure the display screen’s width and peak. The facet ratio is usually expressed as a ratio of the width to peak, reminiscent of 4:3 or 16:9. Listed here are detailed steps on the way to measure the iPad’s display screen dimensions:
-
Measure the Width
Use a ruler or measuring tape to measure the horizontal distance throughout the iPad display screen from the left edge to the precise edge. Document this measurement in millimeters (mm) or inches (in).
-
Measure the Top
Subsequent, measure the vertical distance from the highest fringe of the iPad display screen to the underside edge. Document this measurement in mm or in.
-
Calculate the Side Ratio
Divide the width measurement by the peak measurement to acquire the facet ratio. For instance, if the width is 240 mm and the peak is 160 mm, then the facet ratio could be 240/160 = 3:2.
The next desk summarizes the facet ratios of various iPad fashions:
iPad Mannequin Side Ratio iPad (1st technology) 4:3 iPad 2 4:3 iPad 3 4:3 iPad 4 4:3 iPad Air 4:3 iPad Air 2 4:3 iPad Professional (9.7-inch) 4:3 iPad Professional (10.5-inch) 4:3 iPad Professional (11-inch) 4:3 iPad Professional (12.9-inch) 4:3
Using On-line Instruments for Accuracy
There are quite a few on-line instruments that may present fast and correct measurements to your iPad. These instruments usually require you to enter the mannequin or dimensions of your system. Listed here are just a few in style choices:
| Instrument | Options |
|---|---|
| Apple Help | Official measurements supplied by Apple |
| Speccy | Detailed {hardware} data, together with system dimensions |
| iFixit Restore Guides | Detailed measurements and directions for system repairs |
To make use of these instruments, merely go to the web site and enter the mannequin or dimensions of your iPad. The instrument will then give you the corresponding measurements.
Utilizing a Bodily Ruler or Measuring Tape
Should you desire a extra hands-on strategy, you should utilize a bodily ruler or measuring tape to measure your iPad. To do that, place the ruler or tape alongside the sting of the system and skim the measurement. Be sure that you measure from the sting of the display screen to the sting of the system, together with any bezels or frames.
Contemplating the Side Ratio
When measuring the scale of your iPad, it is also necessary to contemplate the facet ratio. This refers back to the ratio of the width to the peak of the display screen. For instance, an iPad with a 4:3 facet ratio may have a unique display screen measurement than an iPad with a 16:9 facet ratio, even when they’ve the identical diagonal measurement.
Further Suggestions for Correct Measurement
* Use a high-quality ruler or measuring tape for exact measurements.
* Measure from the middle of the display screen to keep away from any distortion.
* If potential, use a instrument that gives measurements in each inches and centimeters.
* Evaluate your measurements with the official Apple specs to make sure accuracy.
Assessing the Decision
The decision of an iPad, measured in pixels, refers back to the variety of particular person pixels displayed on its display screen. Greater resolutions lead to sharper and extra detailed pictures. To measure the decision of an iPad, comply with these steps:
- Navigate to the “Settings” app in your iPad.
- Faucet on “Show & Brightness”.
- Scroll all the way down to the “Decision” part.
- The present decision of your iPad will probably be displayed right here.
- Faucet on “Extra Resolutions” to see a listing of different resolutions obtainable to your system.
- Measure the peak from the highest of the show to the underside.
- Measure the width from the left fringe of the show to the precise edge.
- Measure the thickness at its thickest level, often alongside the facet the place the buttons are situated.
- Millimeters to inches: To transform millimeters to inches, multiply the variety of millimeters by 0.0393701.
- Centimeters to inches: To transform centimeters to inches, multiply the variety of centimeters by 0.393701.
- Ft to inches: To transform toes to inches, multiply the variety of toes by 12.
- Obtain and set up the applying from the App Retailer.
- Open the applying and comply with the directions on the display screen.
- Level the system’s digital camera at your iPad.
- Measure the size, width, and peak of your iPad utilizing the app’s instruments.
The obtainable resolutions for every iPad mannequin differ relying on its display screen measurement and {hardware} capabilities. Some frequent resolutions for iPads embrace:
| iPad Mannequin | Decision |
|---|---|
| iPad (ninth technology) | 10.2 inches, 2160 x 1620 pixels |
| iPad Air (fifth technology) | 10.9 inches, 2360 x 1640 pixels |
| iPad Professional 12.9-inch (sixth technology) | 12.9 inches, 2732 x 2048 pixels |
Checking the Total Dimensions
To precisely measure the general dimensions of your iPad, consult with the official specs supplied by Apple or consult with the person handbook that got here along with your system. The size differ relying on the precise iPad mannequin and technology.
Here is a desk offering the general dimensions for the newest generations of iPad fashions:
| Mannequin | Top | Width | Thickness |
|---|---|---|---|
| iPad Professional 12.9-inch (fifth technology) | 11.04 inches (280.6 mm) | 8.46 inches (214.9 mm) | 0.25 inches (6.36 mm) |
| iPad Professional 11-inch (third technology) | 9.74 inches (247.6 mm) | 7.02 inches (178.5 mm) | 0.23 inches (5.9 mm) |
| iPad Air (fifth technology) | 9.76 inches (247.6 mm) | 7.03 inches (178.5 mm) | 0.24 inches (6.1 mm) |
| iPad mini (sixth technology) | 7.69 inches (195.4 mm) | 5.30 inches (134.8 mm) | 0.28 inches (7.2 mm) |
When measuring the scale, preserve the next in thoughts:
Understanding Show Phrases
Show measurement: Measured diagonally from nook to nook, excluding any rounded edges or bezels (ie. the body across the display screen). Show measurement is usually expressed in inches.
Side ratio: The ratio of the show’s width to its peak. Frequent facet ratios embrace 4:3 (sq.), 16:9 (widescreen), and 16:10 (wider than widescreen).
Decision: The variety of pixels displayed on the display screen. Decision is usually expressed by way of the variety of pixels within the horizontal path by the variety of pixels within the vertical path (e.g., 1920×1080).
Pixel density: The variety of pixels per inch (PPI) of the show. Pixel density impacts the readability and sharpness of the picture, with greater pixel densities leading to sharper pictures.
Coloration depth: The variety of bits used to symbolize every pixel’s coloration. Coloration depth impacts the vary and accuracy of colours that may be displayed, with greater coloration depths leading to extra vibrant and correct colours.
Show sort: The kind of know-how used to show the picture, reminiscent of LCD (liquid crystal show), OLED (natural light-emitting diode), or IPS (in-plane switching). Totally different show sorts supply completely different benefits and drawbacks by way of picture high quality, coloration accuracy, and viewing angles.
Retina show: A high-resolution show with a pixel density that’s excessive sufficient that the person pixels usually are not seen to the human eye at a typical viewing distance. Retina shows present sharp and clear pictures which might be straightforward on the eyes.
| Show Dimension (inches) | Side Ratio | Decision | Pixel Density (PPI) |
|---|---|---|---|
| 9.7 | 4:3 | 1024 x 768 | 264 |
| 10.2 | 4:3 | 1024 x 768 | 326 |
| 10.5 | 4:3 | 1668 x 2224 | 265 |
| 10.9 | 4:3 | 1668 x 2388 | 264 |
| 12.9 | 4:3 | 2048 x 2732 | 265 |
| 11 | 16:10 | 2388 x 1668 | 265 |
| 12.4 | 16:10 | 2560 x 1600 | 265 |
Changing Models of Measurement
Should you’re extra snug measuring with completely different items than inches or centimeters, you possibly can simply convert your iPad’s dimensions utilizing the next desk:
| Unit | Conversion Issue to Inches |
|---|---|
| Millimeters (mm) | 0.0393701 |
| Centimeters (cm) | 0.393701 |
| Ft (ft) | 12 |
For instance, to transform the iPad Professional 12.9-inch mannequin’s peak of 11.04 inches to millimeters, you’ll multiply 11.04 by 25.4 (the variety of millimeters in an inch), which provides you 280.44 millimeters.
Here is an in depth clarification of the conversions:
By following these directions, you possibly can simply measure the scale of your iPad in any unit of measurement you like.
Utilizing Third-Social gathering Purposes
A number of third-party functions can be found that may allow you to measure the scale of your iPad. One in style choice is the Measure app, which is obtainable free of charge on the App Retailer. This app permits you to measure the size, width, and peak of your iPad utilizing the system’s digital camera. An alternative choice is the Ruler app, which can also be obtainable free of charge on the App Retailer. This app gives quite a lot of measuring instruments, together with a ruler, a protractor, and a tape measure. To make use of a third-party software to measure the scale of your iPad:
The next desk summarizes the important thing options of the 2 hottest third-party functions for measuring the scale of an iPad:
| Function | Measure | Ruler |
|---|---|---|
| Value | Free | Free |
| Instruments | Ruler, protractor, tape measure | Ruler, protractor, tape measure |
| Digicam | Sure | Sure |
| Accuracy | Excessive | Excessive |
Evaluating to Different System Sizes
When evaluating the scale of an iPad to different gadgets, it is useful to contemplate the scale of frequent sizes. Here is a desk displaying the scale of varied iPad sizes and their comparability to different gadgets:
| System | Show Dimension (inches) | Dimensions (inches) |
|---|---|---|
| iPad mini (sixth technology) | 8.3 | 7.9 x 5.3 x 0.24 |
| iPad (ninth technology) | 10.2 | 9.8 x 6.8 x 0.29 |
| iPad Air (fifth technology) | 10.9 | 9.7 x 7 x 0.24 |
| iPad Professional 11-inch (4th technology) | 11.0 | 9.7 x 7 x 0.23 |
| iPad Professional 12.9-inch (sixth technology) | 12.9 | 11 x 8.5 x 0.25 |
| iPhone 14 Professional | 6.1 | 5.8 x 2.8 x 0.31 |
| Samsung Galaxy S23+ | 6.6 | 6.2 x 3 x 0.31 |
| MacBook Air (M2) | 13.6 | 11.97 x 8.36 x 0.44 |
| MacBook Professional 14-inch (M2) | 14.2 | 12.31 x 8.91 x 0.61 |
As you possibly can see, iPads are available a variety of sizes, from the compact iPad mini to the bigger iPad Professional. When selecting the best measurement to your wants, take into account what actions you may be utilizing the system for. Should you’re primarily utilizing it for studying, shopping the online, or watching movies, a smaller iPad could also be adequate. Nonetheless, if you happen to’re planning on utilizing it for extra intensive duties like gaming or video enhancing, a bigger iPad with the next decision show could also be a more sensible choice.
Measure Dimension of iPad
To measure the scale of an iPad, you should decide the diagonal display screen measurement. This measurement is usually given in inches and represents the space from one nook of the display screen to the alternative nook diagonally.
To measure the diagonal display screen measurement, you should utilize a ruler or tape measure. Place the ruler or tape measure alongside the diagonal of the display screen, guaranteeing that it runs from one nook to the alternative nook. The measurement you receive would be the diagonal display screen measurement of the iPad.
For instance, if you happen to measure the diagonal display screen measurement of an iPad and acquire a measurement of 9.7 inches, then the iPad has a 9.7-inch display screen.
Folks Additionally Ask
measure iPad peak and width?
To measure the peak and width of an iPad, you should utilize the next steps:
1. Place the iPad on a flat floor.
2. Use a ruler or measuring tape to measure the space from the highest fringe of the iPad to the underside edge. This provides you with the peak of the iPad.
3. Subsequent, measure the space from the left fringe of the iPad to the precise edge. This provides you with the width of the iPad.
