Figuring out the Filter Location
Step one in changing the Frigidaire water filter FPPWFU01 is to find the filter. The filter will be discovered on the higher right-hand aspect of the fridge door. It’s housed inside a small plastic housing that’s usually white or grey in shade.
To take away the filter, you will have to understand the housing and pull it straight out. The housing will slide out simply, and the filter can be seen inside. Make certain to carry onto the housing once you pull it out, because the filter can fall out simply.
After getting eliminated the filter, you will have to take away the previous filter from the housing. To do that, merely press down on the discharge button on the aspect of the housing and pull the previous filter out. You need to now be capable to see the brand new filter. To put in the brand new filter, merely insert it into the housing and push it into place. The filter ought to slide into place simply. As soon as the filter is in place, you will have to switch the housing by sliding it again into place. The housing ought to click on into place when it’s accurately put in. Your fridge’s water filter is now changed, and you may take pleasure in clear, contemporary water once more.
| Instruments You may Want |
|---|
| Phillips screwdriver |
| New water filter |
Gathering Crucial Instruments
Earlier than starting the filter substitute course of, collect the next important instruments:
- Substitute water filter (mannequin FPPWFU01)
- Phillips head screwdriver
- Clear fabric or paper towels
Moreover, it is strongly recommended to arrange a shallow bowl or cup to catch any residual water throughout the filter removing course of.
Supplies Required for Frigidaire Water Filter Substitute
| Merchandise | Amount |
|---|---|
| Frigidaire Water Filter FPPWFU01 | 1 |
| Phillips Head Screwdriver | 1 |
| Clear Fabric or Paper Towels | As wanted |
| Shallow Bowl or Cup (optionally available) | 1 |
Disconnecting the Water Line
After getting positioned the water line, it’s time to disconnect it. Observe these steps rigorously:
- Flip off the water provide to the fridge by turning the water shut-off valve clockwise.
- Disconnect the water line from the fridge by disconnecting the quick-connect becoming. Use a pair of pliers to squeeze the 2 plastic tabs on the becoming and pull it right away from the fridge.
- If the water line is hooked up to the fridge with a screw, use a screwdriver to take away the screw after which pull the road right away from the fridge.
- Place the tip of the water line right into a bowl or cup to catch any dripping water.
Eradicating the Outdated Filter
To take away the previous Frigidaire water filter FPPWFU01, comply with these steps:
1. Find the filter
The filter is often positioned within the fridge’s top-right nook, behind the highest shelf.
2. Flip off the water provide
Find the water provide valve behind the fridge. Flip the knob clockwise to shut the valve and cease the movement of water.
3. Open the filter housing
Push the button on the highest of the filter housing to launch the door. The door will swing down, revealing the filter.
4. Take away the previous filter
Grasp the previous filter and switch it counterclockwise to unlock it. Pull the filter straight all the way down to take away it from the housing.
| Further suggestions for eradicating the previous filter |
|---|
|
Making ready the New Filter
Earlier than you change your previous Frigidaire water filter FPPWFU01 with a brand new one, it is vital to arrange the brand new filter by following these steps:
- Unpack the brand new filter. Take away the brand new filter from its packaging and examine it for any harm.
- Lubricate the O-rings. Apply a small quantity of food-grade lubricant to the O-rings on the brand new filter’s cap. It will assist create a watertight seal and stop leaks.
- Take away the protecting cap. Take away the protecting cap from the tip of the brand new filter.
Activating the New Filter
As soon as the brand new filter is put in, it is vital to activate it to make sure that it really works correctly. To activate the filter, comply with these steps:
- Run water by means of the filter. Run water by means of the filter for 5-10 minutes to flush out any air pockets and sediment which may be current.
- Reset the filter indicator. In case your fridge has a filter indicator, reset it to point {that a} new filter has been put in.
- Get pleasure from filtered water. As soon as the filter is activated, you’ll be able to take pleasure in contemporary, filtered water out of your Frigidaire fridge.
Step Motion Function 1 Unpack the brand new filter. Take away the brand new filter from its packaging and examine it for any harm. 2 Lubricate the O-rings. Apply a small quantity of food-grade lubricant to the O-rings on the brand new filter’s cap. It will assist create a watertight seal and stop leaks. 3 Take away the protecting cap. Take away the protecting cap from the tip of the brand new filter. 4 Set up the brand new filter. Insert the brand new filter into the filter housing and switch it clockwise till it’s cosy. 5 Run water by means of the filter. Run water by means of the filter for 5-10 minutes to flush out any air pockets and sediment which may be current. (300 phrases) 6 Reset the filter indicator. In case your fridge has a filter indicator, reset it to point {that a} new filter has been put in. 7 Get pleasure from filtered water. As soon as the filter is activated, you’ll be able to take pleasure in contemporary, filtered water out of your Frigidaire fridge. Putting in the New Filter
After getting eliminated the previous filter, it is time to set up the brand new one. Observe these steps rigorously to make sure a correct and safe set up:
- Unpack the brand new filter from its packaging.
- Apply a small quantity of edible oil or petroleum jelly to the O-rings on each ends of the filter. It will assist to lubricate the O-rings and create a greater seal.
- Rigorously align the brand new filter with the filter housing. Be certain that the O-rings are seated correctly within the housing.
- Manually tighten the filter by turning it clockwise till it’s cosy. Don’t overtighten, as this may harm the filter or housing.
- In case your fridge has a filter bypass valve, shut it.
- Begin the fridge’s water dispenser and let it run for about 5 minutes to clear any air from the system and activate the brand new filter. If water doesn’t dispense, test for any leaks or be certain that the filter bypass valve is closed.
Further Ideas for Putting in the New Filter:
- At all times seek advice from your fridge’s person guide for particular set up directions.
- When changing the filter, it is a good suggestion to test the water strains for any leaks or harm.
- For those who expertise any difficulties putting in the brand new filter, contact a certified equipment technician for help.
Reconnecting the Water Line
7. **Reconnecting the Water Line**
Rigorously align the water line with the inlet valve on the fridge. The connection must be cosy however not too tight. Discuss with the desk under for the really helpful torque specs:
Connection Dimension Torque (inch-pounds) 1/4″ Compression 30-40 3/8″ Compression 25-35 1/2″ Compression or NPT 10-15 As soon as the connection is safe, use a wrench to softly tighten the nut. Don’t overtighten, as this may harm the water line or fridge inlet valve.
Activate the water provide to the fridge and test for leaks. If any leaks happen, tighten the nut additional or contact a certified plumber for help.
Flushing the System
The ultimate step is to flush the system to take away any remaining air or impurities. It will be certain that your water filter is working correctly and delivering clear, contemporary water.
Step 8: Operating the Water
After putting in the brand new filter, activate the chilly water faucet and run the water for five minutes at a excessive movement price. It will flush out any remaining air or impurities from the system. You might discover some discoloration or black particles within the water throughout this course of, which is regular and can dissipate inside a couple of minutes.
Proceed operating the water till it runs clear. This means that the system has been efficiently flushed and the brand new filter is prepared to be used.
Kind of Water Flush Time Chilly 5 minutes Scorching 1 minute Resetting the Filter Monitor
Press the Filter Reset Button for five Seconds
Find the filter reset button on the entrance of the fridge, often close to the water dispenser. Press and maintain the button for 5 seconds.
Watch for the Filter Indicator to Flash
When you launch the button, the filter indicator mild will begin flashing. This means that the filter monitor has been reset.
Substitute the Water Filter
Substitute the previous water filter with a brand new one and insert it into the designated compartment. Make certain the filter is correctly aligned and totally inserted.
Press the Filter Reset Button Once more
Press and maintain the filter reset button for 3 seconds to verify the substitute. The filter indicator mild will flip stable, indicating that the monitor has been up to date.
Further Particulars for Resetting the Filter Monitor
Listed below are some further particulars to think about when resetting the filter monitor:
Step Description Maintain Time Make sure you maintain the filter reset button for the precise period of time specified. Holding it for much less or extra time could not reset the monitor correctly. Button Location The filter reset button’s location could range barely relying on the particular Frigidaire fridge mannequin. Discuss with the person guide for the precise location. Indicator Mild Response If the filter indicator mild doesn’t flash after urgent the reset button, repeat the method to make sure the reset was profitable. Troubleshooting Widespread Points
1. No Water Stream After Changing the Filter
Be certain that the filter is firmly seated within the housing and that the O-rings are intact. Verify for kinks or clogs within the water line, and ensure the water provide valve is totally open.
2. Water Leaking from the Filter
Tighten the filter housing securely. Examine the O-rings for harm or particles and change them if mandatory. If the leak persists, contact a certified plumber.
3. Unusual Style or Odor from the Water
Flush the water line for a number of minutes to take away any particles or contaminants. If the style or odor persists, the filter could also be faulty. Substitute it with a brand new one.
4. Water Strain Fluctuating
Verify the filter housing for clogs or blockages brought on by sediment or particles. Clear or change the filter as wanted. Additionally, examine the water line for any kinks or bends which may be limiting movement.
5. Filter Indicator Mild Not Resetting
Press and maintain the filter reset button for 5-10 seconds to manually reset the indicator. If the sunshine stays on, the filter might not be correctly put in or could should be changed.
6. Filter Housing Tough to Take away
Apply a lubricant, equivalent to cooking oil, to the O-rings to ease removing. Use a filter wrench or a pair of pliers to softly loosen the housing.
7. Filter Not Correctly Becoming
Evaluate the brand new filter to the previous one to make sure they’re the identical measurement and form. Verify that the filter is accurately aligned and seated within the housing.
8. Filter Bypassing
If water is flowing with out passing by means of the filter, be certain that the bypass valve is closed. Verify the filter housing for any harm that will permit water to bypass the filter.
9. Filter Life Not Exceeded
Monitor the lifetime of the filter and change it when the indicator mild illuminates or after the really helpful variety of months, usually 6-12.
10. Water Not Disbursed from Fridge
Verify if the dispenser pad is pressed correctly. Be certain that the water line just isn’t frozen or kinked. If the difficulty persists, contact a certified equipment restore technician.
The right way to Substitute Frigidaire Water Filter FPPWFU01
Changing the water filter in your Frigidaire fridge is a straightforward activity that may be accomplished in just some minutes. By following these directions, you’ll be able to be certain that your fridge is offering you with clear, contemporary water.
Step 1: Find the Water Filter
The water filter on a Frigidaire fridge is usually positioned within the decrease proper nook of the fridge compartment. It’s often coated by a plastic housing that may be eliminated by lifting it up and pulling it in direction of you.
Step 2: Take away the Outdated Filter
As soon as the housing is eliminated, you will note the previous water filter. To take away it, merely twist it counterclockwise and pull it straight out.
Step 3: Insert the New Filter
Take the brand new water filter and line it up with the housing. Insert the brand new filter all the way in which into the housing, then twist it clockwise to tighten it.
Step 4: Substitute the Housing
As soon as the brand new filter is put in, change the housing by pushing it again into place till it clicks.
Step 5: Reset the Filter Indicator
After changing the water filter, it’s essential reset the filter indicator. To do that, press and maintain the “Filter Reset” button on the management panel for five seconds.
Folks Additionally Ask
How usually ought to I change my Frigidaire water filter?
Frigidaire recommends changing the water filter each 6 months or after 300 gallons of water has been used.
What occurs if I do not change my Frigidaire water filter?
For those who do not change your Frigidaire water filter, the filter will develop into clogged and can not be efficient at eradicating impurities from the water. This may result in a lower in water high quality and will doubtlessly harm your fridge.
The place can I purchase a substitute Frigidaire water filter?
Substitute Frigidaire water filters will be bought at most house enchancment shops, equipment shops, and on-line retailers.
