Insert the New Twine
To insert the brand new wire, observe these steps:
1. Unwind the brand new wire from the spool and straighten it out.
2. Insert the top of the brand new wire into the outlet within the heart of the trimmer head.
3. Pull the wire by the outlet till you attain the specified size.
4. Safe the wire in place by winding it across the spool and inserting it into the slot. Be sure that the wire is wound within the appropriate path, as specified within the trimmer’s person handbook.
Listed below are some extra suggestions for inserting the brand new wire:
Use a brand-new wire of the identical dimension and form as the unique wire. A mismatched wire could cause injury to the trimmer.
Don’t overwind the wire across the spool. Overwinding could cause the wire to interrupt prematurely.
Trim the surplus wire on the finish of the trimmer head.
Wind the Twine Across the Spool
As soon as you’ve got wound the wire across the spool, you have to safe it in place. Do that by inserting the free finish of the wire into the outlet within the heart of the spool. Pull the wire taut and wrap it across the exterior of the spool in a figure-8 sample. Be sure that to maintain the wire taut as you wrap it. As soon as you’ve got wrapped the wire across the spool a number of instances, tuck the top of the wire into the outlet within the heart of the spool once more.
Ideas for Winding the Twine
- Use a pointy knife to chop the wire cleanly.
- Wind the wire in a figure-8 sample to stop it from binding.
- Hold the wire taut as you wrap it across the spool.
- Tuck the top of the wire into the outlet within the heart of the spool to safe it.
| Step | Description |
|---|---|
| 1 | Minimize the wire to the specified size. |
| 2 | Wind the wire across the spool in a figure-8 sample. |
| 3 | Hold the wire taut as you wrap it. |
| 4 | Tuck the top of the wire into the outlet within the heart of the spool. |
How one can Exchange Weed Eater Twine
Changing the wire on a weed eater is an easy job that may be accomplished in a couple of minutes. With only a few fundamental instruments, you possibly can have your weed eater up and working once more very quickly.
- Unplug the weed eater from the facility outlet.
- Take away the previous wire. To do that, merely unscrew the cap on the top of the weed eater and pull out the previous wire.
- Minimize a brand new wire to the specified size. The brand new wire must be lengthy sufficient to succeed in from the weed eater to the facility outlet, however not so lengthy that it will get in the way in which when you are utilizing it.
- Set up the brand new wire. To do that, merely insert the brand new wire into the outlet ultimately of the weed eater and screw on the cap.
- Plug within the weed eater and check it out.
Folks Additionally Ask
How usually ought to I exchange my weed eater wire?
It’s best to exchange your weed eater wire each 6 to 12 months, or extra usually when you use it often.
What kind of wire ought to I take advantage of?
It’s best to use a 14-gauge, 3-wire wire that’s rated for out of doors use.
How lengthy ought to my new wire be?
Your new wire must be lengthy sufficient to succeed in from the weed eater to the facility outlet, however not so lengthy that it will get in the way in which when you are utilizing it.
Can I take advantage of an extension wire with my weed eater?
Sure, you should use an extension wire together with your weed eater, however remember to use a heavy-duty extension wire that’s rated for out of doors use.
