The Astro A50 headset is a well-liked alternative for avid gamers who demand each high-quality audio and luxury. Nonetheless, like all digital units, the A50 can often expertise issues. One frequent situation is that the headset might change into unresponsive or fail to connect with the bottom station. In these instances, resetting the headset to its manufacturing facility settings could also be essential. Resetting the A50 is an easy course of that may be accomplished in a couple of minutes.
First, energy off the headset and base station. On the headset, maintain down the Dolby button for 10 seconds. The headset will flash white after which flip off. On the bottom station, maintain down the ability button for 10 seconds. The bottom station will flash pink after which flip off.
As soon as the headset and base station are each powered off, press and maintain the ability button on the headset for five seconds. The headset will flash white after which activate. Launch the ability button and the headset will connect with the bottom station. The bottom station will flash inexperienced after which activate. The A50 headset is now reset to its manufacturing facility settings.
Figuring out the RESET Button
The RESET button on the Astro A50 Headset is situated on the underside of the suitable earcup, close to the bottom of the headscarf. It’s a small, recessed button that isn’t readily seen. To seek out it, use your finger to softly probe the world till you are feeling a small, raised button.
The RESET button is used to revive the headset to its manufacturing facility default settings. This may be helpful if you’re experiencing any issues with the headset, equivalent to sound distortion or connection points. Resetting the headset will erase all customized settings, so you should definitely again up any necessary configurations earlier than continuing.
To reset the headset, use a paperclip or different small, pointed object to press and maintain the RESET button for 15 seconds. The headset will then energy on and off, and the manufacturing facility default settings will likely be restored.
Here’s a desk summarizing the placement and performance of the RESET button on the Astro A50 Headset:
| Location | Operate |
|---|---|
| Underside of the suitable earcup, close to the bottom of the headscarf | Restores the headset to its manufacturing facility default settings |
Resetting through the BASE Station
Reset Utilizing the PS4 USB Cable:
Join the PS4 USB cable to the entrance of the ASTRO A50 Base Station and the opposite finish into an obtainable USB port on the PS4. Press and maintain the Bluetooth Pair button on the again of the Base Station for five seconds. The Base Station lights will start to flash yellow and pink. When the lights flip stable blue, the reset is full. unplug the USB cable and restart your PS4.
Reset Utilizing the PC USB Cable:
Join the PC USB cable to the entrance of the ASTRO A50 Base Station and the opposite finish into an obtainable USB port in your PC. Press and maintain the Bluetooth Pair button on the again of the Base Station for five seconds. The Base Station lights will start to flash yellow and pink. When the lights flip stable blue, the reset is full. unplug the USB cable and restart your PC.
Reset Utilizing the Optical Cable:
Join the optical cable to the again of the ASTRO A50 Base Station and the opposite finish into an obtainable optical port in your PS4 or PC. Press and maintain the Bluetooth Pair button on the again of the Base Station for five seconds. The Base Station lights will start to flash yellow and pink. When the lights flip stable blue, the reset is full. unplug the optical cable.
| Platform | Working Directions | Further Notes |
|---|---|---|
| PS4 |
|
The PS4 USB cable may also be used to reset the ASTRO A50 Base Station on a PC. |
| PC |
|
The PC USB cable may also be used to reset the ASTRO A50 Base Station on a PS4. |
| Optical Cable |
|
The optical cable can be utilized to reset the ASTRO A50 Base Station on each PS4 and PC. |
Resetting Manually
Manually Resetting through Base Station:
- Unplug the bottom station from its energy supply.
- Await 10 seconds.
- Re-plug the bottom station and switch it on.
- Find the “Reset” button on the again of the headset.
- Press and maintain the “Reset” button for 15 seconds.
- Launch the button and await the headset to reset.
Manually Resetting through Headset:
- Activate the headset.
- Press and maintain the “Recreation” and “EQ” buttons concurrently for 15 seconds.
- Launch the buttons and await the headset to reset.
| Manually Resetting through Headset |
|---|
|
Troubleshooting Reset Points
1. Battery Degree
Make sure the A50 headset has adequate battery life. If the battery is low, the reset is probably not profitable.
2. Base Station Connection
Be certain the headset is correctly seated within the base station and that the connection is safe. A unfastened connection can stop the reset.
3. Firmware Replace
When you encounter difficulties resetting the headset, test if a firmware replace is accessible for the A50 and the bottom station. Putting in the newest firmware can resolve reset points.
4. Wired Connection
If the wi-fi reset strategies are unsuccessful, carry out a wired reset utilizing the next steps:
- Join the headset to the bottom station utilizing the included micro-USB cable.
- Press and maintain the Astro Gaming button on the left earcup for 15 seconds.
- Launch the button and await the headset to restart.
Troubleshooting Wired Reset Points
| Situation | Answer |
|---|---|
| Headset doesn’t restart | Make sure the micro-USB cable is correctly linked to each the headset and the bottom station. |
| Button isn’t responding | Clear the Astro Gaming button with a smooth material to take away any particles or obstructions. |
| Reset course of isn’t finishing | Attempt once more and make sure you maintain the button down for the complete 15 seconds. |
Updating Firmware after Reset
As soon as your Astro A50 headset has been reset, it is a good suggestion to replace its firmware to the newest model. It will be sure that your headset is operating at its finest and has the newest options and enhancements. To replace the firmware, observe these steps:
- Obtain the newest firmware from the Astro web site.
- Join your Astro A50 headset to your laptop utilizing the USB cable.
- Open the Astro Command Heart software program.
- Click on on the “Settings” tab.
- Click on on the “Firmware Replace” button.
- Comply with the on-screen directions to replace the firmware.
As soon as the firmware replace is full, your Astro A50 headset will likely be operating the newest model of the firmware and will likely be prepared to make use of.
Here’s a desk summarizing the steps for updating the firmware in your Astro A50 headset:
| Step | Motion |
|---|---|
| 1 | Obtain the newest firmware from the Astro web site. |
| 2 | Join your Astro A50 headset to your laptop utilizing the USB cable. |
| 3 | Open the Astro Command Heart software program. |
| 4 | Click on on the “Settings” tab. |
| 5 | Click on on the “Firmware Replace” button. |
| 6 | Comply with the on-screen directions to replace the firmware. |
Re-pairing the Headset and BASE Station
To re-pair your Astro A50 Headset and BASE Station, observe these steps:
1. Energy Off the Headset and BASE Station
Maintain down the ability button on each the headset and the BASE Station for six seconds till they flip off.
2. Maintain Down the Dolby Button on the Headset
Whereas the headset is off, maintain down the Dolby button for five seconds till the headset’s LED flashes inexperienced.
3. Energy on the BASE Station
Press the ability button on the BASE Station to show it on.
4. Join the Headset to the BASE Station
Place the headset within the charging cradle on the BASE Station. The headset’s LED will flash orange whereas it fees.
5. Await the Headset to Pair
Await the headset’s LED to cease flashing orange and switch stable inexperienced. This means that the headset has efficiently paired with the BASE Station.
6. Troubleshoot Pairing Points
When you encounter any points pairing your headset and BASE Station, strive the next troubleshooting ideas:
| Situation | Answer |
|---|---|
| The headset’s LED doesn’t flash inexperienced when holding down the Dolby button | Be sure that the headset is turned off earlier than holding down the Dolby button. |
| The headset’s LED doesn’t flip stable inexperienced after charging | Attempt connecting the headset to a special USB port on the BASE Station. |
| The headset and BASE Station nonetheless don’t pair | Attempt resetting each the headset and BASE Station to manufacturing facility defaults. |
Restoring Default Settings
In case you are going through persistent points together with your Astro A50 headset, resetting the machine to its default settings can usually resolve the issue. Restoring the default settings will erase all customized configurations and presets, so it is very important again up any necessary settings earlier than continuing. The next steps will information you thru the method of resetting your Astro A50 headset to manufacturing facility settings:
1. Energy on the headset: Be sure that your Astro A50 headset is powered on and linked to a appropriate base station or USB port.
2. Navigate to the Settings menu: Utilizing the buttons on the headset, navigate to the “Settings” menu.
3. Choose “Restore Defaults”: Scroll down the Settings menu and choose the “Restore Defaults” possibility.
4. Affirm the reset: A affirmation message will seem. Choose “Sure” to proceed with the reset.
5. Await the reset course of to finish: The Astro A50 headset will now carry out the reset course of. The headset will energy off after which robotically flip again on.
6. Reconfigure your settings: As soon as the reset is full, reconfigure your required settings and presets for the headset.
7. Further Suggestions: Along with the above steps, listed below are some extra ideas for a profitable reset:
| Motion | Description |
|---|---|
| Use a USB cable | Join the Astro A50 headset on to a pc or gaming console utilizing a USB cable to make sure a steady connection. |
| Disconnect different units | Unplug some other units linked to the bottom station or USB port to stop interference. |
| Keep away from interruptions | Don’t disconnect the headset or energy off the machine through the reset course of. |
Erasing All Consumer Information
To erase all person knowledge out of your Astro A50 headset, observe these steps:
1. Flip the headset on.
2. Press and maintain the Recreation button for five seconds.
3. The ear cups will flash pink and white.
4. Launch the Recreation button.
5. Press and maintain the Dolby button for five seconds.
6. The ear cups will flash blue and white.
7. Launch the Dolby button.
8. The headset will now be restored to manufacturing facility defaults. All person knowledge, together with pairing info and equalizer settings, will likely be erased.
| Step | Motion |
|---|---|
| 1 | Flip the headset on. |
| 2 | Press and maintain the Recreation button for five seconds. |
| 3 | The ear cups will flash pink and white. |
| 4 | Launch the Recreation button. |
| 5 | Press and maintain the Dolby button for five seconds. |
| 6 | The ear cups will flash blue and white. |
| 7 | Launch the Dolby button. |
| 8 | The headset will now be restored to manufacturing facility defaults. All person knowledge, together with pairing info and equalizer settings, will likely be erased. |
Resetting to Manufacturing unit Defaults
To reset your Astro A50 headset to its manufacturing facility default settings, observe these steps:
1. Maintain Down the Recreation and Dolby Buttons
Find the Recreation and Dolby buttons on the headset, then press and maintain them down concurrently.
2. Slide the Energy Swap to Off
Whereas holding down the Recreation and Dolby buttons, slide the ability swap on the headset to the Off place.
3. Maintain Holding the Buttons for five Seconds
Proceed holding down the Recreation and Dolby buttons for roughly 5 seconds, even after the headset has turned off.
4. Launch the Buttons
Launch the Recreation and Dolby buttons after 5 seconds.
5. Slide the Energy Swap to On
Slide the ability swap again to the On place.
6. Await the Headset to Initialize
The headset will initialize and restore to its manufacturing facility default settings.
7. Reconnect the Headset
As soon as the headset has reset, reconnect it to your gaming console or PC.
8. Redownload the Astro Command Heart
You probably have beforehand put in the Astro Command Heart software program, redownload and reinstall it to entry the newest firmware updates in your headset.
9. Customizing Your Settings
As soon as the headset is reset and reconnected, you may customise your settings within the Astro Command Heart software program, together with:
| Setting | Description |
|---|---|
| Recreation EQ | Alter the audio stability and sound results for particular video games. |
| Voice EQ | Alter the audio stability and readability for voice communication. |
| Sidetone | Management the quantity of your personal voice suggestions by the headset. |
| Microphone Sensitivity | Alter the sensitivity of the headset’s microphone to optimize voice readability. |
| Noise Gate | Cut back background noise and enhance the readability of your voice throughout communication. |
Suggestions for Resetting the Astro A50 Headset
1. Energy Cycle the Headset: Flip off the headset, unplug the bottom station from the ability outlet, wait 30 seconds, and plug it again in. Flip the headset again on to finish the reset.
2. Reset the Base Station: Unplug the bottom station from the ability outlet and await 30 seconds. Press and maintain the “Recreation” and “Dolby” buttons concurrently whereas plugging the bottom station again in. Launch the buttons when the sunshine on the bottom station begins blinking. It will reset the bottom station to its manufacturing facility settings.
3. Manufacturing unit Reset the Headset and Base Station: Flip off the headset and unplug the bottom station. Press and maintain the “Recreation” and “EQ” buttons on the headset whereas plugging within the base station. Launch the buttons when the sunshine on the bottom station begins blinking quickly. It will manufacturing facility reset each the headset and base station.
4. Replace the Firmware: Verify the Astro web site for the newest firmware updates in your headset and base station. Obtain the replace and observe the directions to put in it. This could resolve software-related points that will intervene with the reset course of.
5. Verify the Connection Cables: Be sure that each the headset and base station are securely plugged into the suitable ports. Examine the cables for any seen injury or unfastened connections.
6. Attempt a Completely different Energy Outlet: If energy biking the headset and base station does not resolve the problem, strive plugging them into a special energy outlet. This could get rid of any potential electrical interference.
7. Reset the Optical Output: When you’re utilizing an optical connection, disconnect the optical cable from the bottom station and reconnect it. This could clear any sign transmission points.
8. Verify for Obstructions: Guarantee there are not any bodily obstructions between the headset and base station. Line-of-sight is essential for a steady wi-fi connection.
9. Keep away from Wi-fi Interference: Maintain the headset and base station away from sources of wi-fi interference, equivalent to Wi-Fi routers or cordless telephones.
10. Contact Astro Assist: When you’ve tried the above troubleshooting steps and the headset remains to be malfunctioning, contact Astro help for additional help. They might present extra troubleshooting choices or prepare for a alternative.
Reset Astro A50 Headset
The Astro A50 headset is a well-liked alternative for avid gamers as a consequence of its wonderful sound high quality and luxury. Nonetheless, like all digital units, it could typically expertise issues. In case you are having points together with your Astro A50 headset, resetting it to its default settings might assist to resolve the issue.
Listed here are the steps on find out how to reset your Astro A50 headset:
- Flip off the headset.
- Press and maintain the Dolby button and the Recreation button concurrently for 5-10 seconds.
- The headset will energy on and the lights will flash pink.
- Launch the buttons.
- The headset is now reset to its default settings.
Folks Additionally Ask
How do I reset my Astro A50 with out a pc?
To reset your Astro A50 with out a pc, observe the steps outlined above.
How do I repair my Astro A50 headset not turning on?
In case your Astro A50 headset isn’t turning on, strive resetting it. It’s also possible to strive charging it for a number of hours. If the headset nonetheless doesn’t activate, you could must contact Astro buyer help.
How do I replace my Astro A50 firmware?
To replace the firmware in your Astro A50 headset, you will want a pc.
- Obtain the Astro Command Heart software program from the Astro web site.
- Set up the software program in your laptop.
- Join your headset to your laptop utilizing the USB cable.
- Open the Astro Command Heart software program.
- Click on on the “Firmware Replace” tab.
- Comply with the on-screen directions to replace the firmware.
